Audited Supplier
HYDX-6
CE, ISO 9001:2000, ISO 9001:2008
New
Diesel Engine
Bq/Nq/Hq
2000m
Diamond Bit
Rotary
Metallic and Non-Metallic Ore Excavator
Drilling Machine
Huanghaijixie
Load Into Container
2000M capacity
Lianyungang, China
84304129
Product Description
Transport Dimensions
Working Dimensions
Main Components
1. Main Hoist
2. Auxiliary Winch3. Mud Pump4. Drill Head5. Diesel Engine+Radiator+Triplex Pump1. A General Introd
HYDX-6 Full Hydraulic Core Drill Rig made by H.H. Drill-Tech Drilling Machinery Co., Ltd. is a new-type hydraulic core drill rig developed with reference of advanced technique of similar kind rigs at home and abroad. It is mainly used in core drill with diamond bit or hard tungsten-carbide tipped bit in the field of engineering geology, shallow oil, natural gas, underground water. It can also be applied in the field of gallery ventilation and water discharge tunnel drilling as well as dam grouting and other engineering drilling.
2. Main Features
The rig is compact in structure, rational in overall arrangement, easy in operation, high performance and low maintenance. It is an ideal core drill equipment. The rig adopts full hydraulic driving system and moves with its steel crawlers; The rotation of drill head is driven by variable hydraulic pump and motor, set with 2 gear stepless speed adjustment which is advanced in structure; Drill head feeding adopts double-speed driving device for the chain of the oil tank, the actions are smooth and set with lateral translation mechanism; The mast is lifted and lowered with oil cylinder and is foldable. It is easy for transportation and can slide as a whole. Angles of the mast can be adjusted within the range from 45 to 90 degrees for the drilling hole; The hydraulic system adopts load sensitive control, and the rotation of the spindle is driven by motor with closed loop circuit, with high operation efficiency and big torque; It is equipped with centering guide in its upper and lower part. A hydraulic clamp is adopted at the position above the drilling hole.3. Technical Parameters
| Item | Unit | Parameters | Remarks | ||
Drilling Depth | BQ Rod | m | 2000 | φ55.6mm | |
| NQ Rod | 1600 | φ69.9mm | |||
| HQ Rod | 1300 | φ88.9 mm | |||
| PQ Rod | 1000 | φ114.3mm | |||
Drill Head Capacity | Rotary Speed | r/min | 0~360 | Gear I | |
| 0~1100 | Gear II | ||||
Max. Torque | N·m | 6400 | At 134r/min | ||
Spindle I.D. | mm | 121 | |||
Max. Lifting Capacity | kN | 220 | |||
Max. Feeding Power | kN | 110 | |||
Diesel Engine | Rated Power | kW | 179 | 6CTA8.3-C240 | |
Rated Speed | r/min | 2200 | |||
Hydraulic Pump | Large Pump 90 of 100 series | Rated Pressure | MPa | 32 | |
Max. Flow | L/min | 200 | |||
| Middle Pump 45 of 60 series | Rated Pressure | MPa | 28 | ||
Max. Flow | L/min | 120 | |||
| Small Pump 45 of 60 series | Rated Pressure | MPa | 28 | ||
Max. Flow | L/min | 120 | |||
Side-front Pump 12.5 | Rated Pressure | MPa | 20 | ||
Max. Flow | L/min | 25 | |||
Side-rear Pump 04 | Rated Pressure | MPa | 5 | ||
Max. Flow | L/min | 8 | |||
Mast | Total Height | m | 11.2 | ||
Adjusting Angle | ° | 0~90 | |||
Drilling Angle | ° | 45~90 | |||
Feeding Stroke | mm | 3800 | |||
Sliding distance of mast | mm | 1100 | |||
Main Hoist | Single-Wire Hoisting Capacity | kN | 120 | 1st Layer | |
Lifting Speed | m/min | 44 | |||
Dia. of Steel Rope | mm | 22 | |||
Length of Steel Rope | m | 60 | |||
Auxiliary Winch | Single-Wire Hoisting Capacity | kN | 15 | 1st Layer | |
Lifting Speed | m/min | 100 | |||
Dia. of Steel Rope | mm | 6 | |||
Length of Steel Rope | m | 1800 | |||
Mud Pump | Max. Displacement | L/min | 320 | ||
Max. Pressure | MPa | 8 | |||
Traveling Speed | km/h | 2 | |||
Climbing Capacity | ° | <30 | |||
Earth Contact Pressure Ratio | MPa | 0.14 | |||
Weight of Main Machine | t | 13.5 | |||
| Overall Dimensions | Working Dimensions | mm | 4800×2420×11200 | (L×W×H) | |
Transport Dimensions | mm | 6220×2200×2500 | |||
4. Cases
