Audited Supplier
HYDX-2A
CE, ISO 9001:2000, ISO 9001:2008
New
Diesel Engine
Bq/Nq/Hq
500m/350m/120m
Diamond Bit
Rotary
Metallic and Non-Metallic Ore Excavator
Drilling Machine
Huanghaijixie
Load Into Container
500M capacity
Lianyungang, China
84304129
Product Description
| A General Introduction |
HYDX-2A Full Hydraulic Core Drill Rig made by H.H. Drill-Tech Drilling Machinery Co., Ltd. is a new-type hydraulic core drill rig developed with reference of advanced technique of similar kind rigs at home and abroad. It is mainly used in core drill with diamond bit or hard tungsten-carbide tipped bit in the field of engineering geology, shallow oil, natural gas, underground water. It can also be applied in the field of gallery ventilation and water discharge tunnel drilling as well as dam grouting and other engineering drilling.
| Main Features |
1. The rig is compact in structure, rational in overall arrangement, easy in operation, high performance and low maintenance. It is an ideal core drill equipment.
2. The rig adopts full hydraulic driving system.
3. The rotation of drill head is driven by variable hydraulic pump and motor, set with 2 gear stepless speed adjustment which is advanced in structure.
4. Drill head is driven by cylinder directly, the actions are smooth and set with lateral rolling-over mechanism.
5. The mast is lifted and lowered with oil cylinder. Angles of the mast can be adjusted within the range from 45 to 90 degrees for the drilling hole.
6. The hydraulic system adopts load sensitive control, and the rotation of the spindle is driven by motor with open loop circuit, with high operation efficiency and big torque.
7. It is equipped with centering guide in its lower part. A hydraulic clamp is adopted at the position above the drilling hole.
| Technical Parameters |
| Item | Unit | Parameters | Remarks | ||
| Drilling Depth | BQ Rod | m | 500 | φ55.6mm | |
| NQ Rod | 350 | φ69.9mm | |||
| HQ Rod | 120 | φ88.9mm | |||
| Drill Head Capacity | Rotary Speed | r/min | 0~430~860 | ||
| 0~600~1200 | |||||
| Max. Torque | N·m | 900 | |||
| Max. Lifting Capacity | kN | 50 | |||
| Max. Feeding Power | kN | 25 | |||
| Diesel Engine | Rated Power | kW | 74 | Cummins 4BTA3.9-C100 | |
| Rated Speed | r/min | 2200 | |||
| Hydraulic Pump | Large Pump A10V071 | Rated Pressure | MPa | 22 | |
| Max. Flow | L/min | 156 | |||
| Middle Pump 18 | Rated Pressure | MPa | 20 | ||
| Max. Flow | L/min | 40 | |||
| Small Pump 06 | Rated Pressure | MPa | 20 | ||
| Max. Flow | L/min | 13 | |||
| Mast | Total Height | m | 6 | ||
| Adjusting Angel | ° | 0~90 | |||
| Drilling Angel | ° | 45~90 | |||
| Feeding Stroke | mm | 1800 | |||
| Main Hoist | Single-Wire Hoisting Capacity | kN | 20 | 1st Layer | |
| Lifting Speed | m/min | 84~165 | |||
| Dia. of Steel Rope | mm | 14 | |||
| Length of Steel Rope | m | 30 | |||
| Auxiliary Winch | Single-Wire Hoisting Capacity | kN | 8 | 1st Layer | |
| Lifting Speed | m/min | 96~255 | |||
| Dia. of Steel Rope | mm | 6 | |||
| Length of Steel Rope | m | 500 | |||
| Mud Pump | Max Displacement | L/min | 100 | At 2.5 MPa | |
| Max Pressure | MPa | 6 | At 52 L / min | ||
| Traveling Speed | km/h | 2 | |||
| Climbing Capacity | ° | 30 | |||
| Earth Contact Pressure Ratio | MPa | 0.14 | |||
Weight of Main Machine | t | 6.3 | |||
Overall Dimensions | Working Dimensions | mm | 4300×2220×6000 | (L×W×H) | |
Transport Dimensions | mm | 5000×2220×1800 | |||
