Full Servo Pull up Baby Diaper Machine Production Line

Technical Parameters
1: Model: JWC-LLK400-SV

2: Power Source: Three Phase: 380V 50Hz

3: Installation Power: 320KW(excluding glue applicators, air compressor, the final power shall be confirmed after completion)

4: Product Sizes Medium and large sizes (only changing crotch size instead of changing waist size)

5: Production Speed: 350 PCS/min (Medium)

6: Qualification Rate≥ 96%(excluding glue applicators, wastes caused by splicing raw materials)

7: Overall Size(L× W× H): 38m× 12m× 4.5m(for reference)

8: Machine Process Direction (raw material TO products)right to left(facing machine)

Product Structure
1: Core layer structure: Big cotton core adopts alien continuous stripping to shape and small cotton core adopts direct buckle the forming. Big cotton core and small cotton core are pressed solid after wrapping by tissues.

2. Acquisition layer slitting adopts scraping. (Scraping length is controlled by servo motors. )

3. Top sheets are composed of side nonwovens with elastic and middle materials, compressed by embossing units.

4. Nonwoven sectioning units adopts motor sectioning mode.

5. Tightness of elastic is adjusted by double roller linear velocity controlled by frequency conversion.

6. Roll material and tube material are compatible for elastic feeding.

7. Cotton core cutting and final product cutting adopt side blade scraping.

8. Color calibration of former icon straight cut adding unit.

9. Waist combination adopts heat seal.

10. Detailed shape, structure, sizes of products is confirmed according to the finalized products by both parties.