Audited Supplier
ED27 Low Temperature Resistance
NBR
Pipe Fittings
ED-Ring
High Pressure
O-Ring
Standard
Black
90
-45
Huanling
Carton/Wooden
23.9*29.2*2
China
Product Description
ED-ring is one of the many industrial seals,pipe fittings,hydraulic plug,as a transition joints,pneumatic hydraulic joint special-purpose seals,is better than traditional type O-ring seal.The elastomer seal axial static seal,used as the application in the screw oil mouth and screw end,cross section at high pressure is nearly constant.
Special seals for pneumatic and hydraulic joints such as pipe joints, hydraulic plugs, transition joints, etc. The cross section remains almost constant under high pressure, and the sealing effect is better than that of traditional O-rings .
Function:
Special seals for pneumatic and hydraulic joints such as pipe joints, hydraulic plugs, transition joints, etc. Mainly used for axial static sealing, by tightening the threaded connection and compressing the sealing ring, thus creating a sealing effect on the surface to be sealed. Its geometric structure prevents the seal from twisting during installation and in the mounting housing. At the same time, the sealing ring can block dust and dirt. Due to its geometry, any mechanical deformation of the cross section is minimized.
The mounting groove of the seal ring should comply with the requirements of DIN3852 Part 11. Installation is also possible in mounting housings designed according to ISO 1179, ISO 9974-2, ISO 9974-3 and ISO 11926.
Do not damage the seal ring during installation, otherwise it may cause leakage. Grooves, cavities and scratches should be avoided on the surface to be sealed. Foreign matter such as dust, dirt, chips and other particles should be removed.
Special seals for pneumatic and hydraulic joints such as pipe joints, hydraulic plugs, transition joints, etc. The cross section remains almost constant under high pressure, and the sealing effect is better than that of traditional O-rings . Function:Special seals for pneumatic and hydraulic joints such as pipe joints, hydraulic plugs, transition joints, etc. Mainly used for axial static sealing, by tightening the threaded connection and compressing the sealing ring, thus creating a sealing effect on the surface to be sealed. Its geometric structure prevents the seal from twisting during installation and in the mounting housing. At the same time, the sealing ring can block dust and dirt. Due to its geometry, any mechanical deformation of the cross section is minimized.
The mounting groove of the seal ring should comply with the requirements of DIN3852 Part 11. Installation is also possible in mounting housings designed according to ISO 1179, ISO 9974-2, ISO 9974-3 and ISO 11926.Do not damage the seal ring during installation, otherwise it may cause leakage. Grooves, cavities and scratches should be avoided on the surface to be sealed. Foreign matter such as dust, dirt, chips and other particles should be removed.
