Audited Supplier
E27 Single Station
Single Variety
Continuous
New
Automatic
No Overseas Service Provided
XCLW
Container
10048mm*1913mm*1891mm
Fujian
Product Description
A bulb-E27 Single Station Fully Automatic Production Line
| E27 A bulb-E27 Single Station Fully Automatic Production Line | ||
Main Functions | Operation | Operation condition |
| Divide Plate/Insert Plate | Put the light source panel into cup | About 2-3workers |
| Press Tightly | Press the light source panel with cup tightly | Equipment operated |
| Side Wire | Put the side wire in position | 1 worker |
Wire Straightening | Pull middle wire | Equipment operated |
Offer Cap | Automatic sleeve cap by equipment | Equipment operated |
Power Testing | Test power | Equipment operated |
Defects Rejected | Filter the defective lamp | Equipment operated |
Wire cutting | Automatic cut and curve middle wire | Equipment operated |
Drill Holes | Drill holes | Equipment operated |
Rivet Cap | Rivet cap tightly | Equipment operated |
Glue | Glue | Equipment operated |
Cover the shell | Automatic offer shell and cover | Equipment operated |
Grab Lamp | Grab lamp to assemble line | Equipment operated |
On aging Line | Aging | Equipment operated |
Aging | High pressure, normal pressure, low pressure and impact | Equipment operated |
Off aging line | Collect lamp by robot from aging line | Equipment operated |
Laser marking | Automatic marking label by Laser machine | Equipment operated |
Collect lamp | Collect lamp by manipulator | Equipment operated |
Technological Requirements:
1. Middle Wire: A strand hard wire0.4-0.5mm, middle wire must be higher than cup edge26-29mm
2. Cap: E27Large diameter cap, can be used in general auto assemble cap
(Lamp head circumferential groove and depth not less than 4mm, the rivet diamter≥3.2mm,and must be slope.)
3. Shell Cover: Not burr and deformation
4. Glue Barrel: The volume is 2600ML,The glue should not be too thick or too thin,the speed of gluing is 25g/min
