Audited Supplier
FY pump
110m-150m
>400 L/min
Motor
Single-Stage Pump
Low Pressure Pump
Single Suction Pump
Vertical Pump
Verticaljoint Surface Pump
Suction Centrifugal
Closed
Pump, Pumps, Circulating Pump
1.6~2600m3/H
5~132m
~1.6MPa
-40~180 Degrees
Feiyue
Plywood Box
FY
Jiangsu, China
Product Description
Fy Vertical Wear-Resistant Submerged Pump for Wastewater Slurry submersible pumps water pump
Conform to design standard of ISO2858/GB/T5656
Flow range: 1.6~2600m2/h
Lift range: 5~132m
Design pressure: ~1.6MPa
Application temperature: -40~180ºC
Application field: This series of pump is mainly used in industries of oil refinery, petrochemical engineering, low temperature engineering, coal chemical industry, power plant, environmental protection engineering, wastewater treatment, cement plant etc. Suitable for transporting all kinds of clean, particle free or certain particle contained, neutral or corrosive medium.
Flow range: 1.6~2600m2/h
Lift range: 5~132m
Design pressure: ~1.6MPa
Application temperature: -40~180ºC
Application field: This series of pump is mainly used in industries of oil refinery, petrochemical engineering, low temperature engineering, coal chemical industry, power plant, environmental protection engineering, wastewater treatment, cement plant etc. Suitable for transporting all kinds of clean, particle free or certain particle contained, neutral or corrosive medium.
Summary
FY type vertical centrifugal submerged pump is applicable to convey clean water, sewage and corrosive media, which also available to convey abrasive corrosive media via changing material and partial structure.
Mainly applied
Thermal power plant Chemical factory Food industry Steel making plant
Pharmacy industry
Papemraking factory
Cement factory
Sewage processing factory
Parameter range
Capacity:Q=1.6~2600m2/h
Head:H=5~132m
Working pressure:P=1.6MPa
Working temperature:θ =-40ºC~+180ºC
Under water depth:L≤10m
Meaning of model code
A-Impeller cutting code
32-Design - point head(m)
FY-corrosion-resistant submerged pump series code
80- Inlet diameter(mm)
| 1 | Motor | 2 | Coupling | 3 | Electric frame | 4 | Bearing gland | 5 | Round nut | 6 | On the bearing |
| 7 | Axle | 8 | Bearing box | 9 | Liquid pipe | 10 | And a half of the flange | 11 | Floor | 12 | Bearing |
| 13 | Bearing gland | 14 | Under the takeover | 15 | Bushing clamp | 16 | Bushing | 17 | Pump cover | 18 | Under the collar |
| 19 | Impeller | 20 | Pump body | 21 | Impeller nut |
| 1 | Screen | 2 | Pump body | 3 | Impeller | 4 | Pump cover | 5 | Axle sleeve | 6 | Shaft |
| 7 | Under the takeover | 8 | Guide bearing parts | 9 | Takeover | 10 | Even the axis parts | 11 | On the shaft | 12 | On taking over |
| 13 | Seal seat | 14 | Packing seal | 15 | Bearing gland | 16 | Bearing | 17 | Bearing box | 18 | And a half of the flange |
| 19 | Floor | 20 | Cooling water pipe | 21 | Liquid pipe |
Performance parameters of the table
