Audited Supplier
FYS
>150m
400m3/H
Motor
Single-Stage Pump
Low Pressure Pump
Single Suction Pump
Vertical Pump
Verticaljoint Surface Pump
Suction Centrifugal
Closed
Pump, Pumps, Circulating Pump
400m3/H
200m
~1.0MPa
-20~150 Degrees
Feiyue
Plywood Box
FYS
Jiangsu, China
Product Description
Product Description
Fys Vertical Chemical Process Pump for Water pump Chemical Liquids
Conform to design standard of ISO2858/GB/T5656
Flow range: 3~400m3/h
Lift range: ~50m
Design pressure: ~1.0MPa
Application temperature: -20~150ºC
Application field: This series of pump is mainly used in industries of oil refinery, petrochemical industry, coal chemical industry, power plant, environmental protection engineering, polluted water treatment and cement plant, etc.
Suitable for transporting all kinds of clean, particle free or micro particle contained neutral or corrosive medium.
Flow range: 3~400m3/h
Lift range: ~50m
Design pressure: ~1.0MPa
Application temperature: -20~150ºC
Application field: This series of pump is mainly used in industries of oil refinery, petrochemical industry, coal chemical industry, power plant, environmental protection engineering, polluted water treatment and cement plant, etc.
Suitable for transporting all kinds of clean, particle free or micro particle contained neutral or corrosive medium.
General
FYS series chemical submerged pump is vertical single-stage single -suction centrifugal pump. It is used in transpor-ting cntaining no solid grain no crystal corrosive liquids (it can transport tiny crystal liquids for special made) whose te-mperature is from -20ºC to 150ºC . The operating parts are submerged in liquids, shaft seal has no leakage. It has adva-ntages such as small area, liable usage, convenience repair, strong anti-corrosive. It is widely used in chemical, med-ical and petro-chemical industry.
Product instruction
| 1 | Before the pump cover | 2 | Pump body | 3 | Impeller | 4 | Impeller nut | 5 | Pump cover | 6 | Shaft sleeve |
| 7 | Intermediate to take over | 8 | Liquid pipe | 9 | Middle of guide bearing | 10 | Axle | 11 | Floor | 12 | Bracket |
| 13 | On the collar | 14 | Bearing | 15 | Bearing box | 16 | Bearing | 17 | Coupling | 18 | Motor |
Performance parameters of the table
