Audited Supplier
SHMB3001EU
Signal Repeater
Cable
Standard
With Lightning Protection
RoHS, CE
New
900/1800/2100MHz Tri-Band Mobile Signal Booster
Wide Band
900/1800/2100MHz
31dB
>25dB
Less Than 6dB
Less Than 2.0
>50000 Hours
Indoor Use
AC 90-264V,DC 12V/5A
4kg
Sunhans
Carton
195*180*55mm
China
Product Description
Sunhans 3G 4G LTE 900/1800/2100MHz Indoor 5G NR N78 Tri-band Cell Phone Home Mobile Signal Repeater Extender Booster with LCD Screen
Problem Support;
1. If still no signal receipt after activated booster, please check whether outdoor antenna point to signal tower, or the place you install outdoor antenna have strong signal, it need be 3bar signal or more.
2. If can not call out, please adjust the direction of outdoor antenna.
3. If strength is not steady, please check whether outdoor and indoor antennas are too close. Please ensure the outdoor and indoor antenna have max distance, with a wall between and not in a same horizontal line.
♦ Short leading time: 1-2.5 working days for samples or small order, 10-15 working days for bulk order.
♦ One year warranty: for you without trouble of after-sales maintenance.
♦ Quality Guarantee: Return rate is only 0.001.
♦ Support small orders: help your business from small to big.
♦ OEM & ODM are welcome.
Features:
Enhanced cell phone signal coverage
Supports multiple cellular devices and users simultaneously
The uplink and downlink gain could be set independently. "+" is increasing the gain, "-" is decreasing the gain.
Automatic Gain Control
Enhanced cell phone signal coverage
Supports multiple cellular devices and users simultaneously
The uplink and downlink gain could be set independently. "+" is increasing the gain, "-" is decreasing the gain.
Automatic Gain Control
Cell phone Amplifier Description: 900/1800/2100MHz Indoor 5G Tri-band mobile signal repeater
| Frequency Range | Uplink | Downlink |
EGSM 900MHz | 880MHz-915MHz | 925MHz-960MHz |
DCS 1800MHz | 1735MHz-1765MHz | 1830Mhz-1860MHz |
WCDMA 2100MHz | 1920MHz-1980MHz | 2110MHz-2170MHz |
Max. Gain | 70dB ±1.5dB | 75dB±1.5dB |
Max. Output Power | 20dBm±1.5dB | 17dBm±1.5dB |
| Band Width | Wide Band | |
Manual Gain Contro | 31dB | |
| ALC (Automatic Level Control) | >25dB | |
Ripple in Band | ≤ 8dB | |
| Noise Figure | ≤ 6dB | |
| Intermodulation | ≤ -40dBc | |
| Frequency stability | ≤ 0.01ppm | |
MTBF | > 50000 hours | |
| Operating Temperature | -5 ~ 55 ºC | |
| Environmental Conditions | IP40 | |
| Humidity | 5%~95% | |
| Impedance | 50 Ω (Nominal) | |
| Isolation | >90dB | |
| PCDE | ≤ -38 dBc | |
| Noise Figure | < 5 dB | |
| V.S.W.R | ≤ 2.0 | |
Time Delay | ≤ 1.5μs | |
| Power Supply | Input AC110~240V, Output DC24V/2.5A | |
AGC Alarm | Alarm when ALC control 5dB-10dB | |
ISO Alarm | Alarm when ALC control 20dB-25dB, Then Repeater will Auto Shut Down. Auto restart after two minutes. | |
| RF Connector | N-Female | |
| Switch | Manual Gain Control Switch | |
Cooling | Heatsink Convection cooling | |
| Dimensions (W x H x D) | 195*180*55mm(without connector) | |
| Weight | 4.0 kg | |
All specifications of PA can be customized based on customer requirement.
The repeater makes the signal stronger in places with poor signal coverage such as:
1. Underground areas: basements, parking lots, tunnels, subway, suburb;
2. Other places where cellular signal is shielded by metal or concrete walls: offices, supermarkets, cinemas, hotels, building;
3. Places distant from the BTS like private houses.
1. Underground areas: basements, parking lots, tunnels, subway, suburb;
2. Other places where cellular signal is shielded by metal or concrete walls: offices, supermarkets, cinemas, hotels, building;
3. Places distant from the BTS like private houses.
The repeater makes the signal stronger in places with poor signal coverage such as:
1. Underground areas: basements, parking lots, tunnels, subway, suburb;
2. Other places where cellular signal is shielded by metal or concrete walls: offices, supermarkets, cinemas, hotels, building;
3. Places distant from the BTS like private houses.
1. Underground areas: basements, parking lots, tunnels, subway, suburb;
2. Other places where cellular signal is shielded by metal or concrete walls: offices, supermarkets, cinemas, hotels, building;
3. Places distant from the BTS like private houses.
| Easy Installation |
| 1. Fix up outdoor antenna reception on housetop and point to signal tower. |
| 2. Connect outdoor antenna to "BTS" Port on the Booster through cable. |
| 3. Connect indoor antenna(s) to "User" or "Mobile" Port on the Booster directly or through cable.also. |
| 4. Plug Power Adaptor into AC power socket and finish installation. |
Problem Support;
1. If still no signal receipt after activated booster, please check whether outdoor antenna point to signal tower, or the place you install outdoor antenna have strong signal, it need be 3bar signal or more.
2. If can not call out, please adjust the direction of outdoor antenna.
3. If strength is not steady, please check whether outdoor and indoor antennas are too close. Please ensure the outdoor and indoor antenna have max distance, with a wall between and not in a same horizontal line.
About US
Our Service:
♦ Test process : every items will be testing before shipping, to make sure the quality.♦ Short leading time: 1-2.5 working days for samples or small order, 10-15 working days for bulk order.
♦ One year warranty: for you without trouble of after-sales maintenance.
♦ Quality Guarantee: Return rate is only 0.001.
♦ Support small orders: help your business from small to big.
♦ OEM & ODM are welcome.
