Galvanized Hanging Nail for Building

The material of the product is20Mn2A the type of this product is hot galvanizing the craftsmanship is craft forqing the modei oif this product is 10t the stable working tension is 10t and the product is packed by pallet wooden caseand shipment from Qingdao port.Hot-dip galvanizing has a long anti-corrosion life, but the anti-corrosion life varies in different environments: 13 years in heavy industrial areas, 50 years in the ocean, 104 years in the suburbs, and 30 years in cities. Hot-dip galvanizing principle: clean the iron parts, then treat them with solvents, dry them and immerse them in zinc liquid. Iron reacts with molten zinc to form an alloyed zinc layer. The process is: degreasing - water washing - pickling - plating assistance - drying - hot-dip galvanizing - separation - cooling and passivation. The thickness of the hot-dip galvanized alloy layer mainly depends on the chemical composition of the steel such as the silicon content, the cross-sectional area of the steel, the roughness of the steel surface, the temperature of the zinc pot, the zinc immersion time, the cooling speed, the cold rolling deformation, etc.Advantages of hot-dip galvanizing: 1. Low processing cost: The cost of hot-dip galvanizing for anti-rusting is lower than that of other paint coatings; 2. Durable: In suburban environments, the standard hot-dip galvanizing anti-rust thickness can be maintained for more than 50 years without repair; in urban or offshore areas, the standard hot-dip galvanizing anti-rust layer can be maintained for 20 years without repair; 3. Good reliability: The galvanized layer and the steel are metallurgically combined and become part of the steel surface, so the durability of the coating is more reliable; 4. Strong toughness of the coating: The galvanized layer forms a special metallurgical structure that can withstand mechanical damage during transportation and use; 5. Comprehensive protection: Every part of the plated part can be plated with zinc, even in recessed areas, sharp corners and hidden places, it can be fully protected; 6. Save time and effort: The galvanizing process is faster than other coating construction methods, and it can avoid the time required for painting on the construction site after installation.7. Low initial cost: In general, the cost of hot-dip galvanizing is lower than that of applying other protective coatings. The reason is simple. Other protective coatings such as sandblasting and painting are labor-intensive processes, while hot-dip galvanizing processes are highly mechanized and tightly controlled in-plant construction. 8. Simple and convenient inspection: The hot-dip galvanizing layer can be tested visually and with a simple non-destructive coating thickness meter. 9. Reliability: The specifications of hot-dip galvanizing are generally implemented in accordance with BS EN ISO 1461, which limits the minimum zinc layer thickness, so its anti-rust life and performance are reliable and predictable.