Audited Supplier
WB-SP300D
Floating Ball
Contactless
Digital Type
Integration
Corrosion Resistant
Stainless Steel
IP67
ISO
Customized
Gas Station Fuel Tank Level Measuring Gauge
DC12V
-40 to 85ºC (-40 to 185ºF)
+/-0.5mm
+/-0.1mm
WINDBELL
Cartons, Wooden Case
185*12*12cm
Zhengzhou
902610000
Product Description
Gas Station Fuel Tank level Measuring Gauge Magnetostrictive Density Sensor
What is Magnetostrictive Density Sensor?
Gas station magnetostrictive density sensor can accurately measure fuel level, water level, fuel density and temperature of the fuel tank in real time. then transmit these data to smart console by digital communication port.
SP300D Magnetostrictive density liquid level sensor is mainly composed of probe head, temperature sensors, protection steel pipe, magnetostrictive waveguide wire and floaters with magnet inside. Insert probe into underground tank, floaters float on the liquid surface, and slides up and down on rod according to the changes of liquid level.
- ±0.5mm accuracy
- RS485 communication protocol
- 3-in-1 measurement, detect fuel height, fuel temperature and water height at the same time.
- 4 wires cable
- IP68 protection grade
- Intrinsically safe grade
- ATEX, EAC, CQST, SIL approved
- Length customized production
- Applied in Gasoline, Kerosene, Diesel, Ethanol gasoline, Methanol gasoline, Approved light oil
| Power supply | DC12V |
| Precision | ±0.5mm |
| Repeatability | ±0.2Kg/m³ |
| Resolution of product level | 0.0069mm |
| Resolution of temperature | 0.0078ºC |
| Resolution of water level | 0.0069mm |
| Temperature range | -40 to 60ºC(-40 to 185ºF) |
| Points of temperature measured | 5 |
| Maximum communication distance | 1200m |
| Communication | RS485 |
| Intrinsic safety parameter | Power port: Ui = 15V DC, Ii= 400mA, Pi = 1.5W, Ci = 3.63μF, Li = 0mH; Signal port: Ui = 7.14V DC, Ii= 147mA, Pi = 260mW, Ci = 32.6μF, Li = 0mH; |
| Associated apparatus | WB-GSB03 safety barrier |
| Explosion proof grade | Ex ia IIA T4 Ga, II 1G Ex ia IIA T4 Ga |
| Protection grade | IP67 |
| Applicable medium | Gasoline, kerosene, diesel, Ethanol gasoline, Methanol gasoline, Approved light oil |
| Definition of wires | Blue - Power +: Brown - RS485A : White - RS485B: Black - Power - |
| Communication address | 6 digits, see the"Manufacturing code"or S/N code on probe nameplate, this is also Probe ID in communication with console and FMS |
| Density measure range | 690Kg/m³~900Kg/m³, (Gasoline: 0.70~0.78g/cm3; Diesel: 0.80~0.89g/cm3) |
| Accuracy of density measurement | 3Kg/m³ |
| Resolution of density measurement | 0.1Kg/m³ |
