Audited Supplier
1 Year
CE, ISO, SGS, TUV
Heater, Cooler, Condenser
Mixing Heat Exchanger
Plate Type
EPDM, NBR, Hnber,
Pressure Resistant, Temperature Resistant, Corrosi
Customized
Hotels, Garment Shops, Building Material Shops, Ma
EPDM, NBR, Hnber, Hepdm,Fkw
Clip on, Lock in, Fasten, Glued
DN15~DN500
Customized
JIEMA
Polywood Box
ISO9001: 2008, SGS
Guangzhou, China
8419909000
Product Description
Gasket Plate Heat Exchanger Equipment Accessories
Product Description:
The plate heat exchanger consists of a pack of corrugated metal plates with portholes for the passage of the two fluids between which heat transfer will take place. The plate pack is assembled between a fixed frame plate and a movable pressure plate and compressed by tightening bolts. The plates are fitted with a gasket that seals the interplate channel and directs the fluids into alternate channels. The number of plates is determined by the flow rate, physical properties of the fluids, pressure drop, and temperature program. The plate corrugations promote fluid turbulence and support the plates against differential pressure. The frame plate and the pressure plate are suspended from an upper carrying bar and located by a lower guiding bar, both of which are fixed to a support column. Connections are located in the frame plate or, if either or both fluids make more than a single pass within the unit, in the frame and pressure plates.
| Plate material | SS304, SS316, 254SMO, 904L, C276, Titanium, Nickel, Incoloy825 |
| Plate thickness | 0.5mm, 0.6mm, 0.7mm, 0.8mm, 1.0mm |
| Gasket material | EPDM, NBR, HNBER, HEPDM, FKW |
| Gasket assembly | Clip-on, Lock-in, fasten, Glued |
| Frame material | Carbon steel, Stainless steel, Stainless steel coat |
| Nozzle | Flange, Rubber insert, Metal insert, Thread, Clamp |
| Connection size | DN15~DN500 |
| Connection standard | Customized |
| Color | Customized |
| Application | HVAC, Power, Suger, Marine, Chemical, etc |
Advantage:
Comparing to other types of heat Exchanger, plate heat exchangers have a larger surface area. They are composed of a number of thin metal plates compressed together. The gasket is attached to the heat transfer plate with forms flow channel and acts seal up the fluid. Different materials have different channels and in their respective flow path alternately. They won't leak to the outside. The number of the heat transfer plate is determined according to the amount of fluid, physical properties of the fluid, pressure drop, and thermal condition. Each plate is corrugated to increase the maximum heat transfer area.
Contact Supplier
Mr. Feroz
