Audited Supplier
YAW-1000B
<500mm
<900kg
Strength Testing Machine
<1000KN
0.5
Electronic Load
Dynamic Load
Digital
Computer Control
500-1000Kg
AC380V
Under
CST
Wooden Case
600*600*1450mm
Shandong
90248000
Product Description
YAW-1000B Gate-type Computer Control Single Shaft Rock pressure testing Machine
Brief Introduction:
The machine is controlled by a computer,constant speed loading,automatically complete the test process.The machine can work right now while it is placed on the ground quietly and horizontally.Mainly used for rock solidity test,and the compressive strength test of a rock,concrete,cement products,hollow brick,fly ash brick,refractory materials,engineering materials,stone materials,rubber bearings and other building materials.It is a necessary equipment for highways, railways, bridges, construction, building materials, colleges and universities and other industrial laboratories.It can also be applied to the compression test of red brick,wall brick,block brick,fly ash brick,concrete pavement brick and other materials.
Main Features:
1, maximum test force: 2000KN
2, force value precision:≤±1%(can reach to±0.5%)
3, compression space; 0-350mm
4, compression plate:Φ300mm (300*400mm can be customized)
5, piston stroke: 50mm
6, distance between stand columns: 340mm
7, load-adding speed: 0~25KN/s (digital setting)
8, working temperature: 5ºC-35ºC
9, over-loading protection: auto stop while exceed 3% of full range.
10, machine dimension: 600×600×1450mm
11, motor power:0.75KW
12, working voltage: 380V/220V
13, Working principle: loading by hydraulic, internal signal sensor, fully automatic computer control, real-time detection, automatic processing according to national standard, automatic calculation, printout. The report form can be set by yourself.
14, Protection cover(anti fall)
15, machine weight: 700KG
Brief Introduction:
The machine is controlled by a computer,constant speed loading,automatically complete the test process.The machine can work right now while it is placed on the ground quietly and horizontally.Mainly used for rock solidity test,and the compressive strength test of a rock,concrete,cement products,hollow brick,fly ash brick,refractory materials,engineering materials,stone materials,rubber bearings and other building materials.It is a necessary equipment for highways, railways, bridges, construction, building materials, colleges and universities and other industrial laboratories.It can also be applied to the compression test of red brick,wall brick,block brick,fly ash brick,concrete pavement brick and other materials.
Main Features:
- The machine uses high-precision sensors and computer control, which can automatically control, analyze, store, consult and print test reports.
- The machine uses a rotating screw to adjust the compression space, greatly speeding up the test progress.
- User can design the report forms according to actual requirements.
- Constant stress control, speed display, data processing, and test curve recording during the completion of the test.
1, maximum test force: 2000KN
2, force value precision:≤±1%(can reach to±0.5%)
3, compression space; 0-350mm
4, compression plate:Φ300mm (300*400mm can be customized)
5, piston stroke: 50mm
6, distance between stand columns: 340mm
7, load-adding speed: 0~25KN/s (digital setting)
8, working temperature: 5ºC-35ºC
9, over-loading protection: auto stop while exceed 3% of full range.
10, machine dimension: 600×600×1450mm
11, motor power:0.75KW
12, working voltage: 380V/220V
13, Working principle: loading by hydraulic, internal signal sensor, fully automatic computer control, real-time detection, automatic processing according to national standard, automatic calculation, printout. The report form can be set by yourself.
14, Protection cover(anti fall)
15, machine weight: 700KG
