Audited Supplier
ZCGLY-I
Chemical Tank and Oil Tank
Flange End
Factory Direct Sale
18 Month
Standard
Wcb 304 Al
Measuring Port
Oil
Zhenchao
Wooden Cases
4"-10"
Wenzhou, Zhejiang, China
8481804090
Product Description
company size
Zhejiang Zhen chao Petrochemical Equipment Co Ltd.was founded in 2006, located in Oubei,Yongjia, Zhejiang Province.A company specializing in the production of storage tank protection equipment, at present the company mainly deals with:flamearresters, breathing valves, emergency pressure relief manholes, hydraulic safety valves, oil measuring holes and other storage tank accessories.
Product Description
| Product model | ZCGLY-I |
| Standard or Nonstandard | Standard |
| medium temperature | Normal temperature, medium temperature, high temperature |
| Use To | Chemical tank and oil tank |
| Connect | Flange end |
| country of origin | zhejiang china |
| Sale Type | Factory Direct Sale |
| Warranty Period | 18 Month |
Product Feature:
Oil measuring hole
It is a special accessory for measuring the height of oil level in tank and sampling oil. There is one on the top of each tank, mostly near the ladder platform. The diameter of the measuring hole is 468 inch. It is equipped with a sealed hole cover and a tightening bolt. In order to prevent sparks from colliding with iron when the hole cover is closed, an oil-resistant rubber pad is embedded in the sealing groove of the hole cover. Because the steel tape used for measuring is easy to produce sparks by friction at the contact outlet, copper (or aluminium) sleeves are inserted inside the bore pipe or non-ferrous metal guide grooves (ruler grooves) which do not generate sparks are installed outside the fixed measuring points.
Function:
In order to ensure that the measurement error is reduced by lowering the ruler along the same position every time when measuring oil, a guide groove of aluminum or copper is installed on one side of the inner wall of the oil measuring hole. There should be no welding seam on the bottom plate of oil tank under the oil measuring hole. If necessary, a measuring datum plate can be welded there to reduce the relative error of each measurement.
Acceptance criteria:
SY/T 0511.9-2010
Maintenance:
Maintenance of Gauge Hatch is often opened and closed, which is easy to be damaged and air leakage occurs, so its tightness should be regularly identified. During identification, apply a thin layer of paint on the edge of the hole, gently cover the hole cover, and apply a certain amount of force by hand. If there are obvious and complete marks on the gasket, it can be regarded as qualified. If the marks are incomplete, it means that the hole cover is not tight, and the gasket should be replaced.
PRODUCTION PROCESS
TESTING
Delivery conditions and packing
CERTIFICATES
FAQ:
1.Can I get samples from your factory?
Yes, Samples can be provided.
2. What is your MOQ?
Our MOQ is usually 5 CTNS.
3. What is your delievery time?
Our delievery is about 15-30days.
4. What is your payment terms?
We accept T/T, 100% L/C, or West Union and so on.
5. Can we print our logo on your products?
yes, we offer OEM/ODM service, we support the customized logo, size, package,etc.
5. Why choose us?
we are a manufacturer, we have manufactured valve for over 20 years .comparing with many factories, our prices are more competitive.
Secondly, We 100% test working pressure for ALL our products.
Finally, After- Services will be highly satisfied. Any problems and feedbacks will be responded efficiently.
It is a special accessory for measuring the height of oil level in tank and sampling oil. There is one on the top of each tank, mostly near the ladder platform. The diameter of the measuring hole is 468 inch. It is equipped with a sealed hole cover and a tightening bolt. In order to prevent sparks from colliding with iron when the hole cover is closed, an oil-resistant rubber pad is embedded in the sealing groove of the hole cover. Because the steel tape used for measuring is easy to produce sparks by friction at the contact outlet, copper (or aluminium) sleeves are inserted inside the bore pipe or non-ferrous metal guide grooves (ruler grooves) which do not generate sparks are installed outside the fixed measuring points.
Function:
In order to ensure that the measurement error is reduced by lowering the ruler along the same position every time when measuring oil, a guide groove of aluminum or copper is installed on one side of the inner wall of the oil measuring hole. There should be no welding seam on the bottom plate of oil tank under the oil measuring hole. If necessary, a measuring datum plate can be welded there to reduce the relative error of each measurement.
Acceptance criteria:
SY/T 0511.9-2010
Maintenance:
Maintenance of Gauge Hatch is often opened and closed, which is easy to be damaged and air leakage occurs, so its tightness should be regularly identified. During identification, apply a thin layer of paint on the edge of the hole, gently cover the hole cover, and apply a certain amount of force by hand. If there are obvious and complete marks on the gasket, it can be regarded as qualified. If the marks are incomplete, it means that the hole cover is not tight, and the gasket should be replaced.
PRODUCTION PROCESS
TESTING
Delivery conditions and packing
| Delivery Time | 15-30days |
| package | Standard Exporting Plywood Case |
| Shipping Port | Shanghai/Ningbo China |
| Shipping Terms | EXW, FOB, CFR, CIF |
| Payment Terms | 30% prepayment, 70% balance paid before shipping |
CERTIFICATES
FAQ:
1.Can I get samples from your factory?
Yes, Samples can be provided.
2. What is your MOQ?
Our MOQ is usually 5 CTNS.
3. What is your delievery time?
Our delievery is about 15-30days.
4. What is your payment terms?
We accept T/T, 100% L/C, or West Union and so on.
5. Can we print our logo on your products?
yes, we offer OEM/ODM service, we support the customized logo, size, package,etc.
5. Why choose us?
we are a manufacturer, we have manufactured valve for over 20 years .comparing with many factories, our prices are more competitive.
Secondly, We 100% test working pressure for ALL our products.
Finally, After- Services will be highly satisfied. Any problems and feedbacks will be responded efficiently.
