Audited Supplier
GC-H
1500W-3000W
Handheld
GLORYSTAR
Packaged by Plywood
China
8479899990
Product Description
Product Introduction
Laser cleaning is a new generation of technological solutions for surface cleaning that is easy to install, maneuver and automate. It is simple to operate and can be used with electricity and gas. It is capable of removing rust, coatings, plating, paint, oil, dirt, etc. from the surface of objects.
Glorystar 2D ultra-wide cleaning laser head is suitable for ≤3000w continuous light laser, can scan a variety of graphics (straight line, circle, spiral, rectangle, square, circle filling, rectangle filling, etc.), configured with F800 focusing lens, can achieve ultra-wide cleaning width.
Advantages
1. Non-contact cleaning without damaging the part substrate.
2. Lightweight and convenient, suitable for long time handheld use.
3. No need for any chemical cleaning solution, no consumables, safe and environmentally friendly.
4. Simple operation, can be handheld or with the robot for automated cleaning.
5. High cleaning efficiency, saving time.
6. Stable laser cleaning system, low maintenance cost.
7. Equipped with F800 focusing lens, it can scan a variety of patterns, clean at ultra-long distances, and can reach an ultra-wide scanning line width of 650mm in a straight line.
8. All parameters are visible, real-time monitoring of the machine status, avoid problems in advance, convenient to eliminate and solve problems, to ensure stable operation of the system.
9. High safety: safety lock prevents laser emission caused by misoperation.
Laser cleaning is a new generation of technological solutions for surface cleaning that is easy to install, maneuver and automate. It is simple to operate and can be used with electricity and gas. It is capable of removing rust, coatings, plating, paint, oil, dirt, etc. from the surface of objects.
Glorystar 2D ultra-wide cleaning laser head is suitable for ≤3000w continuous light laser, can scan a variety of graphics (straight line, circle, spiral, rectangle, square, circle filling, rectangle filling, etc.), configured with F800 focusing lens, can achieve ultra-wide cleaning width.
Advantages
1. Non-contact cleaning without damaging the part substrate.
2. Lightweight and convenient, suitable for long time handheld use.
3. No need for any chemical cleaning solution, no consumables, safe and environmentally friendly.
4. Simple operation, can be handheld or with the robot for automated cleaning.
5. High cleaning efficiency, saving time.
6. Stable laser cleaning system, low maintenance cost.
7. Equipped with F800 focusing lens, it can scan a variety of patterns, clean at ultra-long distances, and can reach an ultra-wide scanning line width of 650mm in a straight line.
8. All parameters are visible, real-time monitoring of the machine status, avoid problems in advance, convenient to eliminate and solve problems, to ensure stable operation of the system.
9. High safety: safety lock prevents laser emission caused by misoperation.
Product Parameters
| Model | GC-H |
| Laser source power | 1500W, 2000W, 3000W |
| Fiber length | 10M (Customizable) |
| Laser wavelength | 1080nm |
| Applicable power of cleaning head | ≤3000W |
| Spot mode | Line, spiral, circle, rectangle, circle fill, rectangle fill |
| Cleaning adjustable range | 50-650mm |
| Focus adjustment range | ±100mm |
| Cleaning head weight | 0.9kgs |
| Operating mode | Galvanometer cleaning |
| Operating Voltage | AC220V, 50Hz ±5% (≤2000W) AC380V, 50Hz ±5% (3000W) |
| Machine size | 950*650*1090mm |
| Machine weight | About 200kgs |
