Audited Supplier
Geotextile Manufacturer
Guide The Construction
5-30 Years
White
CE
Corrosion Resistant, Oxidation Resistance, Wear-resistant
Insulation, Waterproof, Water Filter
PP
Woven
2m-6m (as Customrized)
30m, 100m or Customized
Woven Plastic Bag
ASTM GM13
Within 15day
Woven Geotextile,Nonwoven Geotextile
Pet/PP Filament Nonwoven Geotextile
PP/Pet Staple Fiber Nonwoven Geotextile
Looking-forward
Woven Bag
high-density polyethylene
Shandong, China
5602100000
Product Description
China PP Staple Fiber Nonwoven Geotextile Manufacturer
Application:
1. Reinforcement effect: Used in rock engineering such as highways, railways, airports, stone dams, slope embankments, retaining walls, and embankments, to disperse soil stress, increase soil modulus, limit soil slip, and improve stability.
2. Protection function: prevent the embankment from being washed away by wind, waves, tides, and rain, and use it for bank protection, slope protection, bottom protection, and soil erosion prevention.
3. Reverse filtration: Used as a filter layer for embankments, dams, rivers, and coastal rocks, soil slopes, and retaining walls, to prevent sand particles from passing through and allow water or air to pass freely.
TDS technical indicators
Application:1. Reinforcement effect: Used in rock engineering such as highways, railways, airports, stone dams, slope embankments, retaining walls, and embankments, to disperse soil stress, increase soil modulus, limit soil slip, and improve stability.
2. Protection function: prevent the embankment from being washed away by wind, waves, tides, and rain, and use it for bank protection, slope protection, bottom protection, and soil erosion prevention.
3. Reverse filtration: Used as a filter layer for embankments, dams, rivers, and coastal rocks, soil slopes, and retaining walls, to prevent sand particles from passing through and allow water or air to pass freely.
TDS technical indicators
| No. | Item | unit | 100 | 200 | 300 | 400 | 500 | 600 | 700 | |
| 1 | unit weight variation | % | ±6 | |||||||
| 2 | grabstrength | MD | N | ≥450 | ≥900 | ≥1200 | ≥1600 | ≥2000 | ≥2400 | ≥3200 |
| TD | ≥450 | ≥900 | ≥1200 | ≥1600 | ≥2000 | ≥2400 | ≥3200 | |||
| 3 | Trapezoidal tear strength | MD | N | ≥170 | ≥350 | ≥420 | ≥500 | ≥580 | ≥660 | ≥900 |
| TD | ||||||||||
| ≥170 | ≥350 | ≥420 | ≥500 | ≥580 | ≥660 | ≥900 | ||||
| 4 | CBR mullen brust strength | kN | ≥1.3 | ≥2.5 | ≥3.5 | ≥4.3 | ≥5.5 | ≥6.5 | ≥9.0 | |
| 5 | breaking strength | MD | kN/m | ≥5.0 | ≥11 | ≥16 | ≥22 | ≥28 | ≥35 | ≥48 |
| TD | ≥5.0 | ≥11 | ≥16 | ≥22 | ≥28 | ≥35 | ≥48 | |||
| 6 | Elongationatbreak | MD | % | 40~70 | 50~80 | 70±20 | ||||
| TD | ||||||||||
| 7 | puncture resisitance | N | ≥210 | ≥430 | ≥650 | ≥900 | ≥1200 | ≥1500 | ≥2500 | |
