Audited Supplier
GH3039
Aviation, Electronics, Industrial, Medical, Chemical
JIS, GB, DIN, BS, ASTM, AISI
76%
Alloy
Nickel Pipe
Not Powder
Cold Drawn/Cold Roll
Annealed Pickled, Bright Annealed
Round/Hollow
GH-STEEL
Bundles/Wooden Box
GH3039
China
75052200
Product Description
GH3039 is a high-temperature alloy also known as Inconel 713C. It is a nickel-based superalloy that offers excellent high-temperature strength, oxidation resistance, and creep resistance. The alloy contains significant amounts of nickel, chromium, and aluminum, along with smaller amounts of other elements like iron, cobalt, and titanium.
GH3039 tubes are commonly used in applications where high-temperature resistance is required, such as in gas turbine engines, aerospace components, and industrial furnaces. These tubes can withstand temperatures up to approximately 1100°C (2012°F) while maintaining their mechanical properties.
| 1. Material | Steel Grade | GH3030 |
| Production Process | Available in cold rolled and cold drawn | |
| Standard | GBT-15062ASTM B829 / ASME SB829 | |
| 2. Diameter of Stainless Pipe | W.T | 1mm-10mm |
| Diameter | 20mm thru 630mm | |
| Length | 2m-20m, or customer required | |
| 4. Application |
| |
| 5. Packing | *All of our nickel alloy seamless pipes and tubes are packaged according to international standards to prevent any possible damage or loss. By default, we will use thick woven plastic bags to bundle the finished pipes together in batches. For some special pipes and tubes that are vulnerable to dirt, scratches, stress, or rough handling, we will suggest using wooden cases for protection. Please note that wooden cases may incur extra costs not only for the case itself but also for increased freight costs, especially when using air transportation. To enhance customer experience, we also provide dedicated packaging according to your specific requirements." | |
| 6. Delivery Time | 1.for ready stock :7 days after receiving the deposit of T/T 2.For MTO: 35 days after receiving the deposit of T/T | |
| 7. Trade Terms | EXW,FOB, CFR, CIF etc. | |
| 8. Payment Terms | 1.30%T/T in advance, the balance against the B/L copy 2.30%T/T in advance, the balance against the L/C at sight | |
| 9. Loading Port | Ningbo/Wenzhou/Shanghai | |
EQUIVALENT GRADES OF HIGH TEMPERATURE GH3039:
| Grade(GB) | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| GH3039 | - | - | - | - | Зи602,XH75MБTЮ | NC15FE11M | NiCr15Fe |
CHEMICAL COMPOSITION FOR HIGH TEMPERATURE GH3039 SEAMLESS PIPE
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| GH3039 | 0.08 max | 0.40 max | 0.80 max | 0.012max | - | 3 | balance | 19.00 - 22.00 |
| Density | g/cm3 | 8.3 | |
| lb/in.3 | 0.30 | ||
MECHANICAL PROPERTIES FOR HIGH TEMPERATURE GH3039 SEAMLESS PIPE
| Alloy Grade | Tensile Strength min,MPa | Elongation |
| GH3039 | 735 | 40% |
ASTM B829 STANDARD DIMENSION AND PERMISSIBLE
| Permissible Variations | ||||||
| Nominal Outside Diameter, | Outside | Thickness of Specified | Thickness of Specifined | |||
| in. (mm) | Diameter, in (mm) | Average Wall, % | Minimum Wall, % | |||
| Plus | Minus | Plus | Minus | Plus | Minus | |
| Over 0.400(10) to 5/8(16), excl | 0.005(0.13) | 0.005(0.13) | 15 | 15 | 30 | 0 |
| 5/8(16) to 1 1/2(38), incl | 0.075(0.19) | 0.075(0.19) | 10 | 10 | 22 | 0 |
| Over 1 1/2(38) to 3 (76), incl | 0.010(0.25) | 0.010(0.25) | 10 | 10 | 22 | 0 |
| Over 3(76) to 4 1/2(114), incl | 0.010(0.38) | 0.010(0.38) | 10 | 10 | 22 | 0 |
| Over 4 1/2(114) to 6(152), incl | 0.020(0.51) | 0.020(0.51) | 12.5 | 12.5 | 28 | 0 |
| Over 6(162) to 6 5/8(168), incl | 0.025(0.64) | 0.025(0.64) | 12.5 | 12.5 | 28 | 0 |
| Over 6 5/8(168) to 8 5/8(219), incl | 0.031(0.79) | 0.031(0.79) | 12.5 | 12.5 | 28 | 0 |
| AOvality -The permissible variations in this table apply to individual measurements, incluluding out-of-roundness (ovality) except for the following: For pipe and tube having a nominal wall thickness of 3% or less of the nominal outside diameter, the mean outside diameter shall conform to the permissible variations of this table and individual measurements (including ovality) shall conform to the plus and minus values of the table, with the values increased by 0.5% of the nominal ouside diameter. For pipe and tube over 4 1/2 in. (114 mm) in outside diameter with a nominal wall thickness greater than 3% of the nominal ouside diameter with a nominal wall thickness greater than 3% of the nominal outside diameter, the mean outside diameter shall conform to the permissible variations of this table and individual measurements shall not exceed twice the permissible variations of the table.BEccentricity - The permissible variations in this table to individual measurements including eccentricity. | ||||||
Packaging & Shipping
The alloy is highly resistant, particularly to the rapid flow of seawater, making it ideal for marine and seawater applications. Additionally, it finds application in power generation, commercial gas turbines, food processing, chemical processing, cryogenic storage/pressure vessels, tanks .
| Positive Material Identification (PMI) | Guohao Steel can perform PMI testing in house for most stainless steel grades, or we can work with independent labs to complete PMI in order to meet customer specifications. |
| Testing | In some cases, HT/ET/UT testing of the stainless steel pipes may be required. We can assist you with this requirement. |
Q1:How many countries you already exported ?
A1:Exported to more than 30 countries mainly from America, Russia, Ukraine, Vietnam, Egypt, Iran, Turkey, Mexico etc.
Q2:How can I get some samples?
A2:Small samples in store and can provide the samples for free. Catalogue is available, most patterns we have ready samples in stock. Customized samples will take about 5-7days.
Q3:Do you have any MOQ limit for stainless steel products order?
A3: MOQ, 1pc for ready stock of stainless steel seamless pipe. MOQ :1 tons for MTO.
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional. For mass products, ship freight is preferred.
Q5:How does your company do regarding quality control?
A5:Mill Test Certificate is supplied with shipment. If needed, a Third Party Inspection is acceptable or SGS.
Q6: Is it OK to print my logo on products??
A7: Yes. OEM and ODM are available for us.
