Audited Supplier
Glass Fiber Surface Mat Tissue for Gas Pipe
Glass fiber surface tissue is mainly used in the surface layers of FRP products. It is capable of significantly improving the strength of FRP surface layer, strong impaction resistance, excellent uniformity of surface, good covering up the texture of under layers, and good corrosion resistance.
Properties
Uniform fiber dispersion
Smooth surface
Low binder content
Fast resin impregnation
Good mould obedience
Technical Data of Glass fiber surface tissue:
Filament Winding | ||||
Item | Unit | SCC20W | SCC30W | SCC50W |
Area Weight | g/m2 | 20 | 30 | 50 |
Binder Content | % | 7 | 6 | 6 |
Tensile Strength MD | N/5cm | ≥20 | ≥25 | ≥40 |
Soaking Time | S | ≤8 | ≤10 | ≤16 |
Moisture Content | % | ≤0.2 | ≤0.2 | ≤0.2 |
Hand Lay-up Type | ||||
Item | Unit | SCC30H | SCC40H | SCC50H |
Area Weight | g/m2 | 30 | 40 | 50 |
Binder Content | % | 7 | 6 | 6 |
Tensile Strength MD | N/5cm | ≥20 | ≥25 | ≥30 |
Soaking Time | S | ≤10 | ≤15 | ≤20 |
Moisture Content | % | ≤0.2 | ≤0.2 | ≤0.2 |
Each roll is wrapped with plastic film, 40 rolls are put into 1x40FCL with wooden pallets. If pallets are not needed, we can load 44 rolls in 1x40HQ. Based on quantity, special package is available.
Standard Measurement | ||||
Width length | m*m | 1.0*1000 | 1.0*1000 | 1.0*1000 |
Roll Diameter | mm | <1000 | <1000 | <1000 |
Paper Core Internal Dia | mm | 150 | 150 | 150 |
