- Density: Generally between 1.19 - 1.20 kilograms/cubic decimeter.
- Light transmittance: More than 92%, and high-quality ones can be even higher.
- Water absorption rate: Around 0.3%.
- Coefficient of thermal expansion: Relatively large, so expansion gaps should be considered when in use.
- Hardness:
- Cast acrylic sheet has a relatively high hardness, with an average Rockwell hardness value of 90 degrees (imported cast sheets can reach around 89 degrees).
- Extruded sheets have a slightly lower hardness compared to cast sheets.
- Impact strength: Generally, the impact strength is ≥16 kilograms/cubic centimeter; there are differences in different qualities, for example, the notch impact strength is 20 (partial data).
- Tensile strength: ≥61 kilograms/cubic meter.
- Bending strength: For example, 108 MPa (partial data).
- Modulus of elasticity: 2.4 GPa (partial data).
- Heat distortion temperature: ≥78°C; some data shows that the heat distortion temperature is 100°C.
- Thermal softening temperature: ≥105°C.
- Continuous service temperature: Generally, it is recommended not to exceed 85°C.
- Conventional sheet size (length × width): 1.22×2.44 meters, 1.22×1.83 meters, 1.25×2.5 meters, 2×3 meters, etc.
- Thickness: Ranges from 1 - 100 millimeters. Common thicknesses are 2mm - 50mm, etc. In terms of thickness tolerance, the thickness tolerance of imported cast acrylic sheets is controlled within ±0.2mm.
- Weather resistance: Excellent. When used outdoors for a long time, there is little change in appearance and performance.
- It has good resistance to acids and alkalis.
- It has good processability and can be thermoformed (including molding, blow molding, and vacuum thermoforming), machined (drilling, turning, milling, cutting, etc.), laser cut and engraved.
- Color varieties: Rich, including transparent sheets, colored sheets (including translucent colored sheets).
- Melt flow rate: 1.8g/10min (partial data).
- Vicat softening point: 113°C (partial data).
- Combustion performance: Non-flammable and self-extinguishing.

Product name | acrylic sheet / plexiglass sheet/pmma sheet /perspex Sheet/ plastic sheet |
Material | adopt the pure Lucite, high quality MMA raw material. |
Color | clear, transparent, marble,frosted,mirror ,red,blue,white,black , more than 100 kinds of colors. No fading colour in outdoor at least 13 years. |
Density | 1.2g/cm3 |
Technology | cast acrylic sheet production process |
Equipment | Imported glass models |
Quality | acrylic sheet conforms to the environmental protection standard, already through SGS environmental protection authentication. |
payment | L/C, T/T, Western Union, MoneyGram, Paypal |
Clear acrylic sheet is colorless and transparent, its transparency is the topmost one in all plastic, its transmittance is more
than >92% for 100% virgin raw material.
Good adaptability to natural environment, long time under sunlight, wind and rain, its property will not change, Good aging
resistance, it can be used safely outdoors.
Good dimension stability, the product will be beautiful and smooth after formation processing or fitting processing.
Comparing with glass, its density is the half of glass, but the effects of use are just the same. Moreover, it will not scatter
even if its break, so it is safe in use, because of this advantage, it is used widely as construction material to substitute
ceramics.
It won`t do harm to users, even for long time use, Gases emitted during burning are not poisonous.
Very easy to carry out the secondary processing, such as heating processing, mechanical processing, vacuum shaping, printing and
coating.










