Audited Supplier
| Global 6.0 outboard | Global 6.0 outboard with tiller | Global 6.0 pod | |
| Energy type | Electric 100% | ||
| Rated voltage/current | 150V/40A | ||
| Input voltage range | 133V / 168VDC | ||
| Maxinput power | 6kW / 6kW | ||
| Equivalent fuel outboard | 12hp | ||
| Maximum eficiency of the whole machine | 56% | ||
| Ful load speed(forward) | 1560rpm | ||
| Control | Tiler/control box | Tiler | Control box |
| Communication | Cable | ||
| LengthxWidthxHeight | 515x 345 x 1208 | 963x345x1208 | 379x 300x595 |
| Axis length | 625mm | 625mm | 298mm |
| Net weigt | 31kg | 31kg | 23kg |
| Angle of lifting | 0°,15°,30°,45°,60° | ||
| Max lifting angle | 60° | / | |
| Propeller diameter | 300mm | ||
| Working environment/storage temperature | -25°C~ 50ºC (-13°F~122°F) | ||
1. Multiple Protections for Built-in Drivers to Facilitate High Efficiency and Durability of Thrusters
We have installed power isolation, overcurrent protection and overheat protection for the built-in drivers. A ramp linear processing is performed on the control signal. These two upgrades allow the thruster to switch directions frequently and quickly. And voltage fluctuations +-15% will not cause any harm to the thruster. Makes the thruster has long-life.
2. Water-lubricated Alloy Bearings Empower Thrusters with Excellent Wear Resistance and Quality
We use alloy bearings with water lubricating effect, which are very advantageous in terms of wear resistance and quality.
3. Empowered by Magnetically Coupled Drive Technology, Thrusters Achieve Contactless and Anti-overload Torque Transmission
Our thruster adopt magnetically coupled drive technology, is the one that magnet array fitted inside the propeller hub is driven by the one attached inside the housing of the thruster, so as to realize non-contact and leak-free transmission of torque. magnetically coupling structure will produce ratchet effect in case of overload, to prevent the damages caused by objects jammed into the propeller.
4. Professional Test Pool Simulates Real Marine Scenarios to Ensure Thruster Quality through Rigorous Tests over Thousands of Hours
Not only we have capacity from R&D to produce, but also we have professional test pool, which simulate real marine environment, adding sand and shells, we test them before each model is molded, one-time charging for thrusters, uninterruptible power supply, running at full power for more than 1,000 hours. The total time of fatigue test and other tests reaches 3000 hours.
5. Integrated Molding by Five-axis Machining Center, Stainless Steel Thrusters Cast with Precision
We have a professional five-axis machining center, propeller integrated molding. It is SS material.
Successful Case
Q: Are you a factory?
A: Yes, we hava capacity of R&D, produce, test etc..
Q: Why is it Fuber?
A: Fuber is our special brand for electric outboard.
Q: Can we order one set as sample?
A: Of course. MOQ is one set.
Q: If there is problem when we use the goods, how can we do?
A: First of all, please contact us in time, send videos and pictures for us, so that we can judge the problem and find the reason. We will guide you to debug and repair by video conference or email. If you can't solve it, please send the product to us in time, and we will repair immediately and send it back to you as soon as possible. For other content, please refer to after-sales service.
Q: Do you have overseas agent?
A: Yes, now we have agent in Singapore, Canada, Australia. We'd like to cooperate with powerful and intentional customers.
