Audited Supplier
1k 2k 3k 12k 24k
Carbon Fiber Plate
Polyacrylonitrile-Based Carbon Fiber
General Type
Filament
General Type
Bright, Matte
Parallel Stria, Twill
1K-24K
Red, Gold, Blue, Black, Gray
Plywood Box
0.5mm-6mm
China
68151200
Product Description
Glossy Matte surface Carbon Fiber Sheet available now
Introduction to carbon fiber
Carbon fiber (CF) is a new type of fiber material with high strength and high modulus fiber with carbon content of more than 95%. The microstructure of carbon fiber is similar to artificial graphite, which is a disordered graphite structure and shows high strength along the fiber axis.
Characteristics of carbon fiber
Advantage:
1. Carbon fiber is a new material with excellent mechanical properties, which has two characteristics: strong tensile resistance of carbon material and soft processability of fiber;
2. Carbon fiber can have good size, about 19g / 9000 m;
3. Carbon fiber has electrical conductivity and certain thermal conductivity;
4. When not in contact with air and oxidant, carbon fiber can withstand high temperature above 3000 degrees and has outstanding heat resistance;
5. The tensile strength of carbon fiber is about 2 ~ 7gpa and the tensile modulus is about 200 ~ 700gpa;
6. The density is about 1.5 to 2.0 grams per cubic centimeter;
7. The tensile strength of carbon fiber is 7-8 times that of steel, while the density is only 1 / 4 of that of steel, and the specific strength is 20 times that of iron;
8. Carbon fiber has microwave absorption performance;
9. Carbon fiber corrosion resistance;
10. Carbon fiber has certain adsorption.
1. Carbon fiber can be divided into:
Polyacrylonitrile based carbon fiber, pitch based carbon fiber, viscose based carbon fiber, phenolic based carbon fiber and vapor grown carbon fiber. At present, more than 90% of them are polyacrylonitrile based carbon fiber. Note: at present, Mitsubishi is the largest supplier of asphalt based carbon fiber.
2. Carbon fiber is divided into:
Filaments, staple fibers and chopped fibers.
3. It can be divided into:
General purpose, high-strength, medium modulus high-strength, high model and ultra-high model carbon fiber.
Available Sizes(mm):
Introduction to carbon fiber
Carbon fiber (CF) is a new type of fiber material with high strength and high modulus fiber with carbon content of more than 95%. The microstructure of carbon fiber is similar to artificial graphite, which is a disordered graphite structure and shows high strength along the fiber axis.
Characteristics of carbon fiber
Advantage:
1. Carbon fiber is a new material with excellent mechanical properties, which has two characteristics: strong tensile resistance of carbon material and soft processability of fiber;
2. Carbon fiber can have good size, about 19g / 9000 m;
3. Carbon fiber has electrical conductivity and certain thermal conductivity;
4. When not in contact with air and oxidant, carbon fiber can withstand high temperature above 3000 degrees and has outstanding heat resistance;
5. The tensile strength of carbon fiber is about 2 ~ 7gpa and the tensile modulus is about 200 ~ 700gpa;
6. The density is about 1.5 to 2.0 grams per cubic centimeter;
7. The tensile strength of carbon fiber is 7-8 times that of steel, while the density is only 1 / 4 of that of steel, and the specific strength is 20 times that of iron;
8. Carbon fiber has microwave absorption performance;
9. Carbon fiber corrosion resistance;
10. Carbon fiber has certain adsorption.
1. Carbon fiber can be divided into:
Polyacrylonitrile based carbon fiber, pitch based carbon fiber, viscose based carbon fiber, phenolic based carbon fiber and vapor grown carbon fiber. At present, more than 90% of them are polyacrylonitrile based carbon fiber. Note: at present, Mitsubishi is the largest supplier of asphalt based carbon fiber.
2. Carbon fiber is divided into:
Filaments, staple fibers and chopped fibers.
3. It can be divided into:
General purpose, high-strength, medium modulus high-strength, high model and ultra-high model carbon fiber.
Available Sizes(mm):
| 200×300×0.5 | 400×500×0.5 | 500 ×500×0.5 | 500×600×0.5 | 1000×1000×0.5 |
| 200×300×1 | 400×500×1 | 500 ×500×1 | 500×600×1 | 1000×1000×1 |
| 200×300×2 | 400×500×2 | 500 ×500×2 | 500×600×2 | 1000×1000×2 |
| 200×300×3 | 400×500×3 | 500 ×500×3 | 500×600×3 | 1000×1000×3 |
| 200×300×4 | 400×500×4 | 500 ×500×4 | 500×600×4 | 1000×1000×4 |
| 200×300×5 | 400×500×5 | 500 ×500×5 | 500×600×5 | 1000×1000×5 |
| 200×300×6 | 400×500×6 | 500 ×500×6 | 500×600×6 | 1000×1000×6 |
Item | (kg/mm2) Tensile Strength *10Mpa | (t/mm2) Tensile Modulus *GPa |
| HTS | 400 | 24 |
| UTS | 500~ | 24~ |
| IMS | 480~600 | 29~30 |
| HMA | 300 | 35 |
| UMS | 350~500 | 40~68 |
Steel | 40 | 21 |
