Good Price Single Axis Manipulator Injection Robot Arm for Packing

X-650[V] Single Axis AC Servo Injection Robot Manipulator

Advantages: High efficiency, High Precision, Reduce Cost, High Safety.

Injection mold clamping force range:80~150ton
Swing-Arm Robots are extensively applied to horizontal/vertical plastic injection machines ranging from 50T~ 250T which can rapidly take out the runners, runner and finished products from the mold of plastic injection molding machines, and place runners or runners into beside-the-press granulator for recycling immediately.  There are two types of arms-single stage and telescopic.  The vertical stroke for single stage is 550mm and for the telescopic is 650mm.  This series is equipped with a wrist rotation mechanism and gripper sensor that can rotate products at 90°.

Structural Units
Employed high strength & tension aluminum alloy to work with precise linear guideway, features with lightweight, wear resistance, and long service life.

Wrist Rotation Mechanism 90°
The arm front section for installing the gripper can rotate 90°; absorbs & gripper jig can be installed with a sensor device for detecting to get products or not.

Function Features
X-axis can rotate 90° which is for changing molds conveniently, equipped with a hydraulic shock absorber for making forward & backward strokes more stable and smooth. 
Y-axis is equipped with a device to avoid pneumatic cylinder falling;
Z-axis can be adjusted angle from 45°~90° for placing finished parts in different directions according to requirement  ( to place parts at the operated side or non-operated side of injection molding machines).

Safety Protection
External signal interlock with injection molding machine to have double safety protection for molds to ensure no locking molds if parts are not taken out via the signal confirmation of finished product removal.

Control System
Palm controller, friendly operation interface, easy operation.

Model Features
X-650 are mainly used for removal of runner or finished products independently; also can be used for removal of runner and finished products from 2 plate mold simultaneously.
X-650PR are mainly used for removal of runner & runner and finished products from 3 plate mold simultaneously and any arm can be used independently for remove finished parts or runner.
L-550 are extensively applied to vertical injection molding machines, can be used for removal of runner, with fully auto operation.
Swing Arm Robot for Vertical Type IMM.

Motion Pattern

Outer Dimensions


Please note that the price of this item is EXW price (excluding freight and customs clearance fees).