Audited Supplier
99%
67674-67-3
(C2H40) n.C11H30O3Si3
Liquid
Organic Synthesis
Low Toxicity of Reagents
spreading and penetrating agent
Physical Agents
Silicone Agricultural Spray Adjuvant
TOP AGRO
Follow Customer's Request.
GB/FAO/SGS
Zhejiang, China
39100000
Product Description
Specifications
Product name: TOPAGRO 108
Common name: Agricultural organic silicone
Formula: (C2H40) n·C11H30O3Si3
CAS Registry Number: 67674-67-3
Physical & Chemical Characteristics:
Introduction:
Agricultural organic silicon spraying agent is a kind of organic surface active agent. It can be used as a spray modifier, foliar absorption fortifier, activation agent, widely used herbicide, liquid nutrients, growth regulators, insecticides, fungicides, which do not decompose the original pesticide, can greatly reduce the surface tension of the solution, reducing the contact between the droplet and the leaf angle, surface enhanced the liquid in the plant or pest surface wetting, adhesion, and a spreader, thereby improving efficacy.
Product Characteristics:
TOPAGRO 108 is organic silicone adjuvant for agrochemical. Due to its low surface tension, after adding it to agrochemicals:
1. Can improve the adhesion of the pesticides and improve the utilization. Efficient uptake after spraying the crop leaves.
2. Increase the covering surface and expansion capability.
3. Easy to spread out, osmosis, conduction. Quickly and thoroughly enhance the agrochemical's penetrability, disparity, absorption, transportation on the plant. The spreading area and speed of the agrochemical on the leaf of plant can be increased greatly. Especially to those leaves with waxy surface, TOPAGRO 108 can infiltrate and penetrate the plant's stomata's thus moisten them quickly.
4. Reduce the usage of the spraying, effectively save water and time. TOPAGKO 108 can increase the agrochemical's spraying area, thus which can save the dosage of agrochemical by 20-300/n, reduce agro-chemical's spraying amount and ultimately save cost and protect our environment.
5. Reduce the residue of pesticides
6. Decrease the pesticides erosion. Improve the rain erosion resistance and freeze resistance.
By using the adjuvant TOPAGRO 108, the agrochemical can be withstand raining-wash, the
Agrochemical can be sprayed even in the raining days.
7. TOPAGRO 108 is non-toxic, environmental friendly adjuvant.
Effects:
(1) Enhance the efficacy, is about 30%. (2) to save water by 40% - 50%.
Usage:
1. Use scope: Insecticide, fungicide, herbicide and plant growth regulator spray mixing, used for potions.
2. Method of use:
(1) The barrels, usually in 4000 times (5g add 20kg spray solution) to dissolve pesticide with 80% water blender, add this product to 100% water blending.
(2) When using this product, water consumption is reduced to 1/2 - two-thirds of the conventional, dose per unit area reduced to normal 70% to 80%, with smaller diameter nozzle, spray accelerated properly.
3. Usage way and dosage:
(1) Spraying mixture in drum (Tank mixture), Proposes to dilute a million times to compare with similar products. In general, add TOPAGRO 108(5000-3000times) 3-5g in every 15kg spraying liquid. If it needs to promote the adsorption of systemic pesticide, increase the function of pesticide or reduce the amount of spray further, it should add the usage amount properly. In general, the amount is as follows:
Plant promote regulator: 0.025%-0.05%,
Herbicide: 0.025%-0.15%,
Insecticide: 0.025%-0.1%,
herbicide: 0.015%-0.05%,
Fertilizer and trace element: 0.015%-0.1%
When using, first dissolve the pesticide, add TOPAGRO 108 after the uniform mixture of 80% water, then add water to 100% and mix them uniformly. It is advised that when using the adjuvant, the water amount reduced to 1/2 of the normal (suggested) or 2/3, average pesticide usage reduced to 70-80% of the normal. Using the small aperture nozzle will quicken the spray speed.
(2) Original formulations (stoste) of Pesticides.
Adding TOPAGRO 108 to the original formulations of pesticide, we suggest the amount is 0.5%-8%. Adjust the PH value of the pesticide prescription to 6-8. The user should adjust the amount of TOPAGRO108 according to different kinds of pesticide and proscription to reach the most effective and most economical result. Do compatibility tests and stepwise tests before usage.
Disadvantages:
Easy to hydrolysis, can not be mixed with water made of finished products in advance.
Note:
Do compatibility test and step test before use.
Product name: TOPAGRO 108
Common name: Agricultural organic silicone
Formula: (C2H40) n·C11H30O3Si3
CAS Registry Number: 67674-67-3
Physical & Chemical Characteristics:
| Product name | TOPAGRO 108 |
| Appearance | Colourless or light amber transparent liquid |
| Surface tension (0.1% AS,25°C) | <20.5mN/m |
| Cloud point(0.1% AS) | <10°C |
| Viscosity(25°C) | 35cst |
| Optimum pH | 6-8 |
| Content of active ingredient | 100% |
Introduction:
Agricultural organic silicon spraying agent is a kind of organic surface active agent. It can be used as a spray modifier, foliar absorption fortifier, activation agent, widely used herbicide, liquid nutrients, growth regulators, insecticides, fungicides, which do not decompose the original pesticide, can greatly reduce the surface tension of the solution, reducing the contact between the droplet and the leaf angle, surface enhanced the liquid in the plant or pest surface wetting, adhesion, and a spreader, thereby improving efficacy.
Product Characteristics:
TOPAGRO 108 is organic silicone adjuvant for agrochemical. Due to its low surface tension, after adding it to agrochemicals:
1. Can improve the adhesion of the pesticides and improve the utilization. Efficient uptake after spraying the crop leaves.
2. Increase the covering surface and expansion capability.
3. Easy to spread out, osmosis, conduction. Quickly and thoroughly enhance the agrochemical's penetrability, disparity, absorption, transportation on the plant. The spreading area and speed of the agrochemical on the leaf of plant can be increased greatly. Especially to those leaves with waxy surface, TOPAGRO 108 can infiltrate and penetrate the plant's stomata's thus moisten them quickly.
4. Reduce the usage of the spraying, effectively save water and time. TOPAGKO 108 can increase the agrochemical's spraying area, thus which can save the dosage of agrochemical by 20-300/n, reduce agro-chemical's spraying amount and ultimately save cost and protect our environment.
5. Reduce the residue of pesticides
6. Decrease the pesticides erosion. Improve the rain erosion resistance and freeze resistance.
By using the adjuvant TOPAGRO 108, the agrochemical can be withstand raining-wash, the
Agrochemical can be sprayed even in the raining days.
7. TOPAGRO 108 is non-toxic, environmental friendly adjuvant.
Effects:
(1) Enhance the efficacy, is about 30%. (2) to save water by 40% - 50%.
Usage:
1. Use scope: Insecticide, fungicide, herbicide and plant growth regulator spray mixing, used for potions.
2. Method of use:
(1) The barrels, usually in 4000 times (5g add 20kg spray solution) to dissolve pesticide with 80% water blender, add this product to 100% water blending.
(2) When using this product, water consumption is reduced to 1/2 - two-thirds of the conventional, dose per unit area reduced to normal 70% to 80%, with smaller diameter nozzle, spray accelerated properly.
3. Usage way and dosage:
(1) Spraying mixture in drum (Tank mixture), Proposes to dilute a million times to compare with similar products. In general, add TOPAGRO 108(5000-3000times) 3-5g in every 15kg spraying liquid. If it needs to promote the adsorption of systemic pesticide, increase the function of pesticide or reduce the amount of spray further, it should add the usage amount properly. In general, the amount is as follows:
Plant promote regulator: 0.025%-0.05%,
Herbicide: 0.025%-0.15%,
Insecticide: 0.025%-0.1%,
herbicide: 0.015%-0.05%,
Fertilizer and trace element: 0.015%-0.1%
When using, first dissolve the pesticide, add TOPAGRO 108 after the uniform mixture of 80% water, then add water to 100% and mix them uniformly. It is advised that when using the adjuvant, the water amount reduced to 1/2 of the normal (suggested) or 2/3, average pesticide usage reduced to 70-80% of the normal. Using the small aperture nozzle will quicken the spray speed.
(2) Original formulations (stoste) of Pesticides.
Adding TOPAGRO 108 to the original formulations of pesticide, we suggest the amount is 0.5%-8%. Adjust the PH value of the pesticide prescription to 6-8. The user should adjust the amount of TOPAGRO108 according to different kinds of pesticide and proscription to reach the most effective and most economical result. Do compatibility tests and stepwise tests before usage.
Disadvantages:
Easy to hydrolysis, can not be mixed with water made of finished products in advance.
Note:
Do compatibility test and step test before use.
