Audited Supplier
Lx-Hdj1207
Electronics, Piezoelectric Ceramic
Silver: 63%
7440-22-4
Silver Gray
Paste
70+-2.0%
Longxin
Piezoelectric Ceramic Silver Paste
Guangdong, China
Industrial Grade, Electron Grade
Piezoelectric Ceramic
Lx-Hdj1207
Longxin
Carton
1kg/can
China
Product Description
Tiered Pricing Structure: Experience exceptional value with our Silver Conductive Paste, designed for electronic components and ceramic devices. Price per gram is structured to offer you affordable solutions: 100 - 499 grams at just $0.91; 500 - 999 grams at a competitive $0.89; and for orders beyond 1000 grams, enjoy even greater savings at just $0.86 per gram.
Model | LX-HDJ1207 |
Solid content% | 70±2.0 |
Viscosity (dPa.s) | 550±50 |
Finenessμm | ≤10 |
Resistivity(Ω.cm) | ≤2.5*10-6 |
Applicability | Piezoelectric ceramic |
Currently, tailored shipping solutions for your selected quantity are not available. Please contact our support team for assistance in arranging the best shipping strategy to fit your needs efficiently.
Protections for this Product: Secure Payments: Rest assured, every transaction you make on is fortified with robust SSL encryption and PCI DSS data protection protocols, ensuring your financial safety. Easy Return & Refund: If your order is incomplete or encounters issues, claim a seamless refund process. Additionally, enjoy free local returns for defects on qualifying purchases, simplifying your post-purchase experience.
Rest easy knowing that safeguards all your transactions made and paid on the platform, providing peace of mind with every purchase.
Foshan Longxin New Material Co., Ltd.
Q: How many days is the price valid for?
A: The price is valid for one day due to daily fluctuations in silver price. Please consult the salesperson for the exact price.
Q: How should the conductive paste be stored?
A: a. Short-term storage. Seal and place at room temperature within 3-5 days.
b. For long-term storage, sintering slurry (sintering temperature above 400°C) can be stored at room temperature below 25°C, and stored in a refrigerator when the room temperature is higher than 25°C.
c. Quick-drying slurry and low-temperature curing slurry (below 200°C) can be stored in a refrigerator at 5~15°C.
d. Regardless any type of slurry, remember to seal it during storage.
Q: What are the precautions before using conductive paste?
A: a. Take it out half a day in advance to warm it up or preheat it in a ventilated oven at 25~30°C for 20 minutes.
b. Do not open it before it returns to room temperature to prevent water vapor from cooling into the paste.
Q: What should be paid attention to when using the conductive paste?
A: a. Make sure the paste is consistent with the ambient temperature.
b. Stir it thoroughly before use to restore the performance of the paste.
Q: Do we need to add diluent when using conductive paste?
A: a. Generally, the viscosity of the paste is adjusted before leaving the factory, so it can be used directly after fully stirring without adding diluent.
b. If it is necessary to add due to the process, such as increasing fluidity, spraying process, etc., add small amounts gradually and stir thoroughly. Do not add too much at one time.
c. Please use special diluents and do not mix them to cause performance changes.
A: The price is valid for one day due to daily fluctuations in silver price. Please consult the salesperson for the exact price.
Q: How should the conductive paste be stored?
A: a. Short-term storage. Seal and place at room temperature within 3-5 days.
b. For long-term storage, sintering slurry (sintering temperature above 400°C) can be stored at room temperature below 25°C, and stored in a refrigerator when the room temperature is higher than 25°C.
c. Quick-drying slurry and low-temperature curing slurry (below 200°C) can be stored in a refrigerator at 5~15°C.
d. Regardless any type of slurry, remember to seal it during storage.
Q: What are the precautions before using conductive paste?
A: a. Take it out half a day in advance to warm it up or preheat it in a ventilated oven at 25~30°C for 20 minutes.
b. Do not open it before it returns to room temperature to prevent water vapor from cooling into the paste.
Q: What should be paid attention to when using the conductive paste?
A: a. Make sure the paste is consistent with the ambient temperature.
b. Stir it thoroughly before use to restore the performance of the paste.
Q: Do we need to add diluent when using conductive paste?
A: a. Generally, the viscosity of the paste is adjusted before leaving the factory, so it can be used directly after fully stirring without adding diluent.
b. If it is necessary to add due to the process, such as increasing fluidity, spraying process, etc., add small amounts gradually and stir thoroughly. Do not add too much at one time.
c. Please use special diluents and do not mix them to cause performance changes.
