Audited Supplier
12x12-14
30-50m
300-400 L/min
Motor
Single-Stage Pump
High Pressure Pump
Single Suction Pump
Horizontal Pump
Horizontal Split Pumps
Suction Centrifugal
Open
Pump
Sunbo Pump
Wooden Case
China
Product Description
Gorman Rupp 612L20B-B Centrifugal Pump
Gorman Rupp 60 Series Pump
Pump model : 12x12 12x12-14
Pump inlet szie : 12 inch Outlet size : 12 inch Impeller : 14 inch
60 Series pumps are standard centrifugal, high pressure, high volume pumps with exceptional efficiencies (up to 85%). Discharge on many models can be placed in any position by turning the pump casing.
Features:
1.Replaceable wear-resistant metal or rubber liners and impellers, long service life time.
2. Easy to adjust the space between impeller and front liner and can be removed completely when maintaining.
3.Bearing assembly use grease lubrication.
4. Seal types: packing seal, expeller seal and mechanical seal.
5. Discharge direction can be installed at intervals of 45 degrees as request and oriented to any eight positions to suit applications.
6. Drive types: V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices.
7. Wide application, good NPSH and high efficiency. The series pump can be installed in multistage to meet the delivery for long distance.
Specification :
D:25 mm to 450 mm
Q: to 5,000 m3/hr
H: to 73 m
Gorman Rupp 60 Series Pump
612L20B-B Standard Centrifugal Pump
Pump model : 12x12 12x12-14
Pump inlet szie : 12 inch Outlet size : 12 inch Impeller : 14 inch
| 612L20B-B Specifications | |
|---|---|
| Suction | 12" (300 mm) |
| Discharge | 12" (300 mm) |
| Solids Handling | 1.88" (48 mm) |
| Casing | Cast Iron |
| Impeller/Rotor | Ductile Iron |
| Seal Material | Tungsten Carbide |
| Flange | ANSI |
| Drive Type | Basic |
| Unit Weight | 960 lbs |
60 Series pumps are standard centrifugal, high pressure, high volume pumps with exceptional efficiencies (up to 85%). Discharge on many models can be placed in any position by turning the pump casing.
Features:
1.Replaceable wear-resistant metal or rubber liners and impellers, long service life time.
2. Easy to adjust the space between impeller and front liner and can be removed completely when maintaining.
3.Bearing assembly use grease lubrication.
4. Seal types: packing seal, expeller seal and mechanical seal.
5. Discharge direction can be installed at intervals of 45 degrees as request and oriented to any eight positions to suit applications.
6. Drive types: V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices.
7. Wide application, good NPSH and high efficiency. The series pump can be installed in multistage to meet the delivery for long distance.
Specification :
D:25 mm to 450 mm
Q: to 5,000 m3/hr
H: to 73 m
