Audited Supplier
Electric Wire & Cable
Waterproof Tape
Optical Fiber Cable, Data Cable, Telecom Cable
0.05mm-0.2mm
More Than 180MPa
More Than 15%
Reliable
Wooden Package
Customized
China
Product Description
Product Name:
Copolymer coated copper tape
1, Application:
Copolymer coated copper tape applies for medium and high voltage power cables as a shield/moisture barrier as a moisture/ chemical barrier for cable core.2, Composition:
It consists of a copper tape coated on single side or double side with a special ethylene copolymer color-coded green. The coating forms a strong moisture-resistant bond to the copper substrate that will not delaminate from contact with the copper. The coatings also form strong polymeric bonds to zero halogen, polyethylene and chlorinated polyethylene jacketing resins during the jacket extrusion process thereby allowing fabrication of "bonded jacket" or laminate sheath, cables. The copper alloy is fully annealed which has high conductivity and easy fabrication characteristics.
3, Standard:
YD/T 723.4-2007.
4, Packing:
In roll, then pack into wooden case, the core material is paper/steel/plastic
| Inner diameter | Width | Outer Diameter |
| 76mm/102mm/150mm/406mm | 10mm-1000mm | Up to 1000mm without joints |
| Thickness | Tensile strength | Elongation | Peel strength | Heat Seal strength | Corrosion resistance | Filler/ Flood Resistance 68 deg C/168 hrs | Water Resistance 68 deg C/ 168 hrs, Peel Strength68ºC | Dielectric Strength Two-Side, DC 1 Kv No Break | Conductivity | |
| Copper | EAA | |||||||||
| mm | mm | MPa | % | N/cm | N/cm | Grade | - | N/cm | - | IACS |
| 0.10-0.20 | 0.05 | ≥180 | ≥15 | ≥5 | ≥17.5 | 7 | No Delamination | ≥5 | No Break | ≥90% |
