Audited Supplier
Grundfos-NB
17m
79m³/H
Motor
Single-Stage Pump
Low Pressure Pump
Single Suction Pump
Horizontal Pump
Horizontal Split Pumps
Non Self-Priming Single-Stage Centrifugal Pump
Closed
Condensate Pump, Circulating Pump, Heating Supply and Irrigation
-25 ~120 °c
16bar
55 °c
0.315m³
GRUNDFOS
Standard Export Plywood Case or Carton
Gross weight: 100KG
Denmark
Product Description
GRUNDFOS NB 65-200/205
The Grundfos NB 65-200/205 non self-priming single-stage vortex shell centrifugal pump is designed according to the ISO5199 standard.Grundfos NB 65-200/205 end suction coupling pump, compliant with EN 733 standard.
Rated flow rate: 54.37 m³/h
Rated head: 12.98 m
Liquid temperature range: -25.. 120 ° C
Liquid temperature during operation: 20 ° C
Application scenarios:Commercial air conditioning,Heating supply,
irrigation
Rated flow rate: 54.37 m³/h
Rated head: 12.98 m
Liquid temperature range: -25.. 120 ° C
Liquid temperature during operation: 20 ° C
Application scenarios:Commercial air conditioning,Heating supply,
irrigation
Performance
Electrical machinery
NB 65-200/205 AAF2KESBQQEJW3
The non self-priming single-stage vortex shell centrifugal pump is designed according to the ISO5199 standard, and its dimensions and rated performance comply with the EN 733 standard (10 bar). The flange is PN 16 type, and its dimensions comply with EN 1092-1 standard. The water pump is equipped with an axial suction port, a radial discharge port, a horizontal shaft, and a rear pull design, which allows maintenance personnel to disassemble the motor, motor seat, cover, and impeller without loosening the pump casing or pipeline. The unbalanced O-type shaft seal complies with DIN EN 12756 standard. A air-cooled asynchronous motor is tightly coupled to the water pump.
| controller: | |
| Frequency converter: | None |
| Pressure sensor: | N |
| : | |
| : | |
| : | -25 .. 120 °C |
| : | 20 °C |
| : | 998.2 kg/m³ |
| : | |
| : | 1460 / |
| : | 54.37 m³/h |
| : | 12.98 |
| : | 205 |
| Nominal impeller diameter: | 200 |
| : | Single |
| : | BQQE |
| : | BQQE |
| Curve tolerance: | ISO9906:2012 3B2 |
| Bearing design: | Standard |
| : | |
| : | Stainless steel |
| Pump housing: | EN 1.4408 |
| : | ASTM CF8M |
| Wear ring: | Stainless steel |
| EN 1.4517 | |
| ASTM CD4MCuN | |
| : | Stainless steel |
| EN 1.4408 | |
| ASTM CF8M | |
| Internal pump house coating: | No coating |
| Shaft: | Stainless steel |
| EN 1.4401 | |
| AISI 316 | |
| : | |
| : | 55 °C |
| : | 16 |
| Pipe connection standard: | EN 1092-1 |
| : | DN 80 |
| : | DN 65 |
| Pressure rating for pipe connection: | PN 16 |
| Bearing lubrication: | Grease |
| Pump housing with feet: | Yes |
| Yes = With support block, No = Without support block: | N |
| : | |
| : | INNOMOTICS |
| --P2: | 3 |
| : | 50 Hz |
| : | 3 x 220-240D/380-420Y V |
| : | 10.3/5.9 |
| : | 730 % |
| Cos phi--: | 0.83 |
| : | 1460 / |
| : | IE3 87,7% |
| IE: | IE3 |
| : | 87.7 % |
| 3/4: | 88.4 % |
| 1/2: | 88.2 % |
| : | 4 |
| (IEC 34-5): | IP55 |
| (IEC 85): | F |
| : | 83V05210 |
| Bearing insulation type N-end: | N |
| : | |
| Minimum efficiency index, MEI ≥: | 0.70 |
| Net weight: | 83 |
| Gross weight: | 100 |
| : | 0.315 m3 |
