Audited Supplier
TP 400-760/4
139m
4374 M³/H
Motor
Single-Stage Pump
25 Bar
Single Suction Pump
Vertical Pump
Verticaljoint Surface Pump
Since Irrigation Centrifugal Pumps
Semi-Open
Condensate Pump
Grundfos
Standard Export Plywood Case or Carton
5640kg
Product Description
Grundfos TP Suitable for
1.Commercial heating
2.Commercial air conditioning
3.Regional heating
4.Regional cooling
5.Heating supply
6.refrigeration
7.Seawater desalination
8.Drinking water treatment
9.Municipal water supply and distribution
10.irrigation
11.Water supply for residential areas and buildings
Single stage pipeline pump
Optimize hydraulic system
Realize high-efficiency top pull-out design for easy maintenance and disassembly
Improve corrosion resistance
controller
Frequency converter: None
Liquid
Transported liquid: water
Liquid temperature range: 0-150 ° C
Liquid temperature during operation: 20 ° C
Density: 998.2 kg/m³
Technology
The pump data is based on the pump speed on it: 1492 revolutions per minute
Rated flow rate: 3512 m³/h
Rated head: 51 meters
Actual impeller diameter: 480 millimeters
Main shaft seal: DBUE
Shaft seal code: DBUE
Curve tolerance: ISO9906:2012 3B
Material Science
Pump casing: ductile iron
Pump housing: EN-GJS-400-18-LT
Pump casing: ASTM Grade 60-40-18
impeller: Ductile iron
EN-GJS-400-15
Installation
Environmental temperature range:-20 .. 40 °C
Maximum operating pressure:25 bar
Maximum pressure at specified temperature:25 bar / 150 °C
Pipe connection standard:EN 1092-2
Interface model:DIN
Size of connection:DN 500/DN 400
Pressure rating for pipe connection:PN 40
Port-to-port length:1400 mm
Flange size for motor:FF940
Electrical data
Motor model: INNOMOTICS_SIEMENS
Rated power - P2: 630 kW
Power frequency: 50 Hz
Rated voltage: 3 x 380-420D/660-725Y V
Rated current: 1060-1060/610-620 amps
Starting current: 680 %
Cos phi - Power Factor: 0.88
Rated speed: 1490 revolutions per minute
IE efficiency level: IE2
Number of motor poles: 4
Encapsulation level (IEC 34-5): IP55
Insulation Class (IEC 85): F
Motor Number: 96509256
other
Minimum efficiency index, MEI ≥: 0.7
Net weight: 5200 kg
Gross weight: 5640 kg
Transport volume: 10.8 m3
1.Commercial heating
2.Commercial air conditioning
3.Regional heating
4.Regional cooling
5.Heating supply
6.refrigeration
7.Seawater desalination
8.Drinking water treatment
9.Municipal water supply and distribution
10.irrigation
11.Water supply for residential areas and buildings
Single stage pipeline pump
Optimize hydraulic system
Realize high-efficiency top pull-out design for easy maintenance and disassembly
Improve corrosion resistance
| TP 400-760/4 A-F-A-DBUE-YW3 A tightly coupled single-stage vortex pump with coaxial suction and discharge ports of the same diameter. The water pump is designed to be pulled up. For example, the power head (motor, pump head, and impeller) can be disassembled for maintenance while maintaining the connection between the pump casing and the pipeline. A balanced O-ring seal is installed on the water pump. The shaft seal complies with DIN EN 12756 standard. The connection of the pipeline is achieved through PN 40 DIN flanges (EN 1092-2 and ISO 7005-2 standards). An asynchronous motor with a cooling fan is installed on the water pump. | |
controller
Frequency converter: None
Liquid
Transported liquid: water
Liquid temperature range: 0-150 ° C
Liquid temperature during operation: 20 ° C
Density: 998.2 kg/m³
Technology
The pump data is based on the pump speed on it: 1492 revolutions per minute
Rated flow rate: 3512 m³/h
Rated head: 51 meters
Actual impeller diameter: 480 millimeters
Main shaft seal: DBUE
Shaft seal code: DBUE
Curve tolerance: ISO9906:2012 3B
Material Science
Pump casing: ductile iron
Pump housing: EN-GJS-400-18-LT
Pump casing: ASTM Grade 60-40-18
impeller: Ductile iron
EN-GJS-400-15
Installation
Environmental temperature range:-20 .. 40 °C
Maximum operating pressure:25 bar
Maximum pressure at specified temperature:25 bar / 150 °C
Pipe connection standard:EN 1092-2
Interface model:DIN
Size of connection:DN 500/DN 400
Pressure rating for pipe connection:PN 40
Port-to-port length:1400 mm
Flange size for motor:FF940
Electrical data
Motor model: INNOMOTICS_SIEMENS
Rated power - P2: 630 kW
Power frequency: 50 Hz
Rated voltage: 3 x 380-420D/660-725Y V
Rated current: 1060-1060/610-620 amps
Starting current: 680 %
Cos phi - Power Factor: 0.88
Rated speed: 1490 revolutions per minute
IE efficiency level: IE2
Number of motor poles: 4
Encapsulation level (IEC 34-5): IP55
Insulation Class (IEC 85): F
Motor Number: 96509256
other
Minimum efficiency index, MEI ≥: 0.7
Net weight: 5200 kg
Gross weight: 5640 kg
Transport volume: 10.8 m3
