Audited Supplier
GV2 series electric motor protection circuit breakeruses the modular design the contour is artistic, the volume is smalbreakes protects, inside sets Hot relay, the function is strong, theversatility is good. The GV2 series conforms to lEC60947.2 andIEC60947-4.1 as well as the EN60947-1 standard. The switch andthe contact device may compose the electric motor is direct starts.The GV2 series outer covering protection rankmay achieve lP65. This series pooled three types model product: GV2-RS is theelectric motor belt thermomagnetism protection circuit breaker whichthe changover switch con-trols; GV2-LS,LE is the electricmotr belt magnetism protection circuit breaker which the change-over switch controls(does not bring hot protection).
- High Breaking Capacity
- Flammablity: UL94V0
- Current adjustion
- Long life-span
- CE certificate
| Type | The standard power of three-phase electromotor kW | Rated current adjustable range | |||||
| 220V | 380V | 415V | 440V | 500V | 660V | ||
| GV2-M01 | - | - | - | 0.1-0.16 | |||
| GV2-M02 | - | - | - | 0.16-0.25 | |||
| GV2-M03 | - | - | - | 0.25-0.4 | |||
| GV2-M04 | - | - | - | 0.37 | 0.4-0.63 | ||
| GV2-M05 | - | - | - | 0.37 | 0.37 | 0.55 | 0.63-1 |
| GV2-M06 | - | 0.37 | - | 0.55 | 0.55 | 1.1 | 1-1.6 |
| GV2-M07 | 0.37 | 0.75 | 0.75 | 1.1 | 1.1 | 1.5 | 1.6-2.5 |
| GV2-M08 | 0.75 | 1.5 | 1.5 | 1.5 | 2.2 | 3 | 2.5-4 |
| GV2-M10 | 1.1 | 2.2 | 2.2 | 3 | 3.7 | 4 | 4-6.3 |
| GV2-M14 | 2.2 | 4 | 4 | 4 | 5.5 | 7.5 | 6-10 |
| GV2-M16 | 3 | 5.5 | 5.5 | 7.5 | 7.5 | 9 | 9-14 |
| GV2-M20 | 4 | 7.5 | 9 | 9 | 9 | 11 | 13-18 |
| GV2-M21 | 5.5 | 11 | 11 | 11 | 11 | 15 | 17-23 |
| GV2-M22 | 5.5 | 11 | 11 | 11 | 15 | 18.5 | 20-25 |
| GV2-M32 | 7.5 | 15 | 15 | 15 | 18.5 | 26 | 24-32 |
| Auxiliary contacts | Code | The types of contacts | Installation place | |||||
| AE1 | 1NO,1NC | The front of breaker(only 1PCS can be installed) | ||||||
| AE11 | 1NO+1NC | |||||||
| AE20 | 2NO | The left of breaker(4PCScan be installed) | ||||||
| AN11 | 1NO+1NC | |||||||
| AN02 | 2NC | |||||||
| Fault signal contacts + auxiliary contacts | AD1010 | Constant-open trouble NO NC | ||||||
| AD1001 | ||||||||
| AD0110 | Constant-closed trouble NO NC | |||||||
| AD0101 | ||||||||
| Short circuit contacts | Am11 | 1NO+1NC | ||||||
