Audited Supplier
ZHJ-2500
Water Cooling
Vertical
Intermediate Frequency
AC
One-Body
Argon Arc Welder
200-2500mm
6-25mm
200-800mm
6-30mm
6-15m
Submerged Arc Welding
300-1000(mm/Min.)
3-5mm
Hydralic
Conveyor, Length 4m, 2 Section
12m
SAFETY
Suitable for Export Transportation
2000mm
China
8468800000
Product Description
Integrated assembly, welding, straightening machine for H-Beam
Application and characteristics:
Features and performance:
1. The main components of this machine are the main frame, feed conveyor, discharge conveyor, traction centering system, welding system, hydraulic system, and electrical control system.
2. The main framework consist of an upper entrance and a lower base section. The upper department can press and support the beam wall. Four sets of guide rail systems provide stable and reliable direction.
3. When positioning the wall frame and shelf, hydraulic transmission is used. Mechanical synchronous fixtures and centering systems are used on both sides to achieve automatic positioning and centering. It also provides an eccentric wheel for fine-tuning.
During the assembly process of I-beams, an automatic hydraulic lifting bracket is used to stop the material at the end and ensure alignment between the wall end and the shelf.
5. In the welding device setting unit, the position can be adjusted up and down and left/right, and can also be rotated to a certain angle to ensure high accuracy of the weld position.
6. In proper installation, the use of pressure hydraulic cylinders has the characteristics of high correction performance and easy adjustment.
Edit the performance chart as shown in the following figure:
7. The machine tool is equipped with a 4-meter-long input conveyor (2 parts, one of which is electrically driven). The export conveyor is 12 meters long. It consists of two lifting conveyors used to support I-beam steel beams.
8. There is a traction system at the front end, consisting of three traction units, used for centering the wall and frame once.
9. The machine tool is equipped with a hydraulic system. The hydraulic pump is manufactured by a professional company, which is easy to maintain and has a long service life.
10. The welding system includes the Chinese 1250 device or can be selected according to the customer's preference.
Application and characteristics:
- Optimized integrated design of the entire machine, achieving high efficiency and large-scale automatic processing.
- Automatic centering assembly, carry out straightening while welding H-Beam.
- Compared to ordinary H-beam production lines, this machine saves factory space and significantly reduces the number of operators required.
| Model | ZHJ-2000 | ZHJ-2500 | |||
| Web size of H-Beam(mm) | Height | 200-2000 | 200-2500 | ||
| Thickness | 6-20 | 6-20 | |||
| Flange size of H-Beam(mm) | Width | 200-800 | |||
| Thickness | 6-30 | ||||
| Length of workpiece(mm) | 6000-15000 | ||||
| Welding technology | Welding method | Submerged arc welding | |||
| Welding speed(mm/min.) | 300-1000 | ||||
| Fast return speed(mm/min) | 3000 | ||||
| Welding wire dia.(mm) | 3-¢5 ¢3-¢5 | ||||
| Feeding wire speed(rpm) | 0-120 | ||||
| Solder flux recycling machine | Quan. | 100kg×2 | |||
| Wire weight(KG)/ | 250 | ||||
| Straightening method | Hydraulic | ||||
| Input roller conveyor | Conveyor, length 4m, 2 section | ||||
| Output roller conveyor | 12 м | ||||
Features and performance:
1. The main components of this machine are the main frame, feed conveyor, discharge conveyor, traction centering system, welding system, hydraulic system, and electrical control system.
2. The main framework consist of an upper entrance and a lower base section. The upper department can press and support the beam wall. Four sets of guide rail systems provide stable and reliable direction.
3. When positioning the wall frame and shelf, hydraulic transmission is used. Mechanical synchronous fixtures and centering systems are used on both sides to achieve automatic positioning and centering. It also provides an eccentric wheel for fine-tuning.
During the assembly process of I-beams, an automatic hydraulic lifting bracket is used to stop the material at the end and ensure alignment between the wall end and the shelf.
5. In the welding device setting unit, the position can be adjusted up and down and left/right, and can also be rotated to a certain angle to ensure high accuracy of the weld position.
6. In proper installation, the use of pressure hydraulic cylinders has the characteristics of high correction performance and easy adjustment.
Edit the performance chart as shown in the following figure:
7. The machine tool is equipped with a 4-meter-long input conveyor (2 parts, one of which is electrically driven). The export conveyor is 12 meters long. It consists of two lifting conveyors used to support I-beam steel beams.
8. There is a traction system at the front end, consisting of three traction units, used for centering the wall and frame once.
9. The machine tool is equipped with a hydraulic system. The hydraulic pump is manufactured by a professional company, which is easy to maintain and has a long service life.
10. The welding system includes the Chinese 1250 device or can be selected according to the customer's preference.
