Audited Supplier
H103
H103 macroporous adsorption resin is a type of macroporous adsorption resin, non-polar, belongs to the system of styrene.Developed mainly for adsorption and separation of small organic molecules. Because of the special manufacturing process, its apertures are very uniform, and it has a high specific surface area.Widely used in treatment of organic wastewater, removal of food residue organic, removal of pesticide residues in agricultural products, removal of organic residue in Chinese herbal medicines,and etc
Reference Operation Conditions
- Adsorption:
Loading height: ≤ 3M
Flow rate: 1~6m/h
Organic impurity concentration: < 1 (such as acetic acid, acetone, methanol, benzene, formic acid, etc.)
PH=4~6 - Desorption:
Desorption solution: 1~2%NaOH methanol or acetone
Usage: 2~4BV 2BV
Flow rate: ≤ 5m/h ≤ 5m/h
Temperature: 40~50 ºC
Application
- Mainly used for treating organic wastewater, removal or recovery of most of the organic compounds.
- Juice purification, decolorization of acid, removing bitter taste.
- Separation and purification of antibiotics, vitamins, amino acids, steroids, enzyme and so on.
- Separation, recovery of nonpolar substances from a polar solvent, such as phenol.
- Adsorption and separation of flavonoids.
Precautions
- Resin should be wet state preservation. The best temperature is above 0ºC. Resin should be put into a closed space or add in salt water of 5% or above if not used for a long time.Should be anti-freezing during transportation. Do not place heavy objects on the resin in case being crashed.
- Generally requires alkali- water - acid - water flow path for processing. Strict requirement needs three circulation before coming to final ion kenel.
- Need to consider different transformation expansion rate to set aside enough space to prevent resin overflow and ensure the appropriate liquid level height; Column diameter ratio should be within a reasonable range and avoid bias current; Use wet packed column or back-flushing to wash away bubbles inside resin layer.
- Before liquid going into the resin column, steps as flocculation, filtration, or sand-filtration should be taken so that it doesn't jam resin pore with suspended solids .
- Resin inside the column that hasn't been used for a long time should be storaged outside of the column after washing, or adding salt water in the salt resistant medium while keeping liquid level not dehydrated with usual backwashing to loosen resin in case of agglomeration.
Index
Name | Specification |
Appearance | Brown black opaque spherical particles |
Polarity | Non polar |
Moisture % | 45%~55% |
Real Density (g/ml) | 1.05~1.10g/ml |
Bulk Density (g/ml) | 0.70~0.75g/ml |
Specific surface area | 1000~1200m3/g |
Average pore size | 8.5~9.5nm |
Porosity % | 55%~60% |
Particle size range | 0.3~1.25mm |
The structure of resin | PSt |
Q1. What is the existing capacity to produce?
The annual output of cation and anion exchange resin is more than 20,000 tons,.
Q2. What are our advantages?
A. Our delivery time can be guaranteed. We use environment-friendly machine and built in national level chemical industrial park
B. We have complete production lines. We can custom made the products as customer requirements
C. We are near to Tianjin port and QingDao Port, so we have lower cost on transportation.
Q3. How about our quality of products?
We will test all the raw materials and arrange them into the factory after they are qualified. After the completion of production and testing, only qualified products can be packaged. We strictly follow the production process. Workers with more than 10 years of production experience, timely deal with problems and make registration, and issue 8D report.
Q4. Can I get free sample?
Yes, you can get 200g free sample, you just need to pay for the courier fee.
Q5. What's your delivery time?
15- 30 days after receiving your payment, depends on different products.
Q7. How should I pay?
We accept all kinds of payment ways. such as Alibaba trade Assurance, T/T, L/C,D/A,D/P, O/A,West Union.
Q8. Do you have other Water purification equipment and also can supply complete after-sales service.
We can also provide these products to meet your requirements, we also have a team to do the after- sales service.
Q9. Is it possible to custom the labels with my own design?
Yes, and you just need to send us your bag design, then you can get you want.
