HSB-315b Pipe Cutting Machine Automatic Cutting Pipe Machine CNC Pipe Profile Cutting Machine

1.The cutting machine use the block-drive turbine worm .

2. Small nose,small shock, without dust pollution, no thorns.

3. Tangent plane is fluent,good quality internal and external incisions.High priduction and precision of saw cutting.

4. Vertical slideway for advance and retreat blade up and down.

5. Cutting feed is steady and cutting tools are of long use life.

6.Cooling and lubricante system ensure the cutting surface and prolong the life of saw blades.

7. Advance of tool adopts manual mode, the cutting machine's head can rotate 45 degree left and right.

Machine model	HSB-275 Series		HSB-315 Series
Cutting direction	90 degree	45 degree	90 degree	45 degree
Hollow pipe	80	60	100	80
Hollow square steel	60×60	45×45	90×90	80×80
Hollow rectangular pipe	60×80	45×60	80×90	80×80
Solid rectangular steel	60×60	45×45	90×90	80×80
Solid shafting	38	25	55	45
Solid square steel	38	25	50	40

 

Servo motor: can accurately control the feeding length and speed of the cutting material to ensure the accuracy and consistency of cutting.
Quick response: has fast dynamic response capability and can adjust according to the instructions of the control system in a short time. When the cutting machine needs to change the cutting speed, feeding length or perform other operations, the servo motor can respond quickly to ensure the normal operation of the equipment.
High stability: stable operation, can maintain stable performance during long-term working process, and is not easily affected by external interference.

The 315 cutting machine head is the part that directly performs the cutting action. For cutting metal materials (such as steel, aluminum, etc.), the head cuts the material through the high-speed rotating cutting blade. Driven by the motor, the cutting blade rotates at a very high speed, using the sharp part of the cutting blade edge to grind and cut the material. For example, in the processing of construction steel, the 315 cutting machine head can cut long steel bars or angle steels to the required length.

The clamp position must have no gaps to be firm, avoiding damage to the saw blade and clamping on both sides to prevent material
deformation or loosening

Ensure thick and pure copper wire, international motor