Audited Supplier
Technical datasheet of S6061-04D Standard Damper Actuator (Non Fail-Safe Damper Actuators)
Item | Unit | S6061-04DN(F) | S6061-04DN(F) |
Torque | Nm | 4 | |
Damper area | m2 | 1 | |
Running time | sec | 30~40 35 35 | |
Power supply | V | 24VAC/DC | 230VAC |
Frequency | Hz | 50/60 | |
Running consumption | W | 4.0 | |
Maintaining consumption | W | 3.0 | |
Weight | Kg | 1.0 | |
Control signal | 2/3 point | ||
Position signal | potentiometer | ||
Rotation angle | 0~90º(Max 93º) | ||
Limited angle | 5~85º(per step 5º) | ||
Life cycle | >70 000 | ||
Noise Level | 45dB(A) | ||
Electrical level |
| ||
Protection level | IP44 or IP54 | ||
Ambient Temperature | -20~+50ºC | ||
Ambient Humidity | 5-95%RH | ||
Storage temperature | -40~+70ºC | ||
Certificate | CE/ UL | CE | |
Remark: After lead to the actuator wire through the PG joint, the protection level can reach IP54.
Wiring diagram of S6061-04D Standard Damper Actuator (Non Fail-Safe Damper Actuators)
On/off type
Auxiliary switch of S6061-04D Standard Damper Actuator (Non Fail-Safe Damper Actuators)
There are 2 auxiliary switches of the actuator, and you can set the angle 0-90° (the factory sets a is 10° and b is 80°). It will output a on/off signal when the actuator rotates the setting angle. (There is no auxiliary switch of modulating type).
Control signal and choose the direction of rotation of S6061-04D Standard Damper Actuator (Non Fail-Safe Damper Actuators)
Outline dimension of S6061-04D Standard Damper Actuator (Non Fail-Safe Damper Actuators)
Unit(mm)
