Audited Supplier
Cummins Nt855-C280 engine,power(kw/r/min)187/1850,powerful,efficient and energy-saving.
High reliability power shift gearbox,stable hydraulic torque converter ,and final drive with two-satge straight tooth structure can efficiently transmit power,with high transmission power and high production efficiency.
The engine can work normally and reliably under any load conditions and any thermal environment required by the user without causing engine overheating.
It can realize automaic fault diagonsis and whole process monitoring.The integral cast instrument panel integrates air conditioning,electrical appliance and instruments,making it more beautiful and high-end.
The main frame with a full box structure shall be made of high-performance materials and high-strength castings,and shall have a high capacity of bearing impact load and resisting bending and torsion.High quality welds shall ensure that the main frame has a full life cycle.
Semi rigid suspension traveling system can increase the grounding area of the track and improve the traction of the vehicle.
According to ergoonomics,the driver's seat armrest can be easily adjusted up,down,forward and backward.The speed change,steering and throtte control are placed on the left side,and the flexible shaft structure is used.The working device is placed on the right side,and hte servo control system is used to make the operation process more light and flexible and reduce fatigue.
The standard straight tilt bulldozer has strong cutting force and cope with various difficult operating environments:large single tooth scarifier with adjustable penetration angle can be used for loosening clay,frozen soil and other soil layers,and canalso be used for stripping gravel,hardened salt mines and other hard working surfaces.
| Parameter | |
| Model | HD24s |
| Dimension(mm) | 6290*4365*3395 |
| Weight(T) | 25.7 |
| Engine model | NT855-C280 |
| Power(kw/r/min) | 187/1850 |
| Grounding length(mm) | 3480 |
| Ground specific pressure(MPa) | 0.041 |
| Minimum ground clearance(mm) | 405 |
| Gradeability(°) | 30 |
| No.of track shoes(each side) | 45 |
| Width of Track shoe(mm) | 910 |
| Track Gauge(mm) | 2250 |
| Pitch(mm) | 216 |
| No.of carrier rollers(each side) | 2 |
| No.of track rollers (each side) | 8 |
| Maximum traction froce (KN) | 203 |
| Blade type | Straight-tilt Blade |
| Blade length*height(mm) | 4365*1287 |
| Blade capacity(m³) | 6.8 |
| Blade lift height(mm) | 1330 |
| Blade depth(mm) | 550 |
| Maximum inclination of blade(mm) | 755 |
| Forward(km/h) | 3.6/6.5/11.2 |
| Reserve(km/h) | 4.3/7.7/13.2 |
| Coolant capacity(L) | 79 |
| Fuel tank capacity(L) | 450 |
| Engine oil capacity(L) | 45 |
