Audited Supplier
handhled/portable ultrasonic flow meter
Profiles:
High quality Handheld Ultrasonic Flow Meter with Clamp On Ultrasonic Flowmeter -HUF2000-H incorporates the latest ICs manufactured from the famous semiconductor manufacturers like Philips, Maxim, TI, Winbond, and Xilinx. The hardware features the ease of operation, high accuracy and outstanding reliability, while the software provides a very friendly user interface and much more functions. It employs a patent balanced lower voltage multi-pulse igniting circuit which increases the anti-interference ability magnificently so that the flow meter will work properly even in demanding industrial environments such as those with power frequency transverter working nearby.
Features:
* Large-screen LCD
* Non-contacting measuring
* Built-in data-logger
* Built-in rechargeable battery
* High accuracy measuring
* Wide measuring range
* Small and light
* RS-232 serial interface
Specifications:
Linearity | 0.5% |
Repeatability | 0.2% |
Accuracy | ±1% of reading at rates>0.2 mps |
Response Time | 0-999 seconds, user-configurable |
Velocity | ±32 m/s |
Pipe Size | 25mm-6000mm |
Totalizer | 7-digit totals for net, positive and negative flow respectively |
Liquid Types | Virtually all liquids |
Security | Setup values Modification Lockout. Access code needs unlocking |
Display | 4x8 Chinese characters or 4x16 English letters |
Communication Interface | RS-232, baud-rate: from 75 to 57600. Protocol made by the manufacturer and |
Transducer Cord Length | Standard 5m x 2, optional 10m x 2 |
Power Supply | 3 AAA built-in Ni-H batteries. When fully recharged it will last over 12 hours of operation. 100V-240VAC for the charger |
Data Logger | Built-in data logger can store over 2000 lines of data |
Manual Totalizer | 7-digit press-key-to-go totalizer for calibration |
Housing Material | ABS |
Case Size | 210x90x30mm |
Handset Weight | 500g with batteries |
Portable Type Ultrasonic flow meter TUF-2000H
Optional Transducers
V-method installation is the most widely mode for daily measurement with pipe inner diameters ranging from 25 mm to 400 mm. It is also called reflective mode.
Z-method is commonly used when the pipe diameter is above 200mm.
Wide Application:
Ultrasonic flow meter is mainly used in the following conditions and Industry
1. Environmental protection: municipal sewage measurement
2. Oil: native flow measurement
3. Water Service Company: River, river, reservoir water measurement
4. Petrochemical Industry: petrochemical product process flow detection
5. Paper: paper pulp flow measurement
6. Pharmaceutical factory: chemical flow measurement
7. Power plant, thermal power plant: the production process water consumption measurement,
cooling circulating water flow measurement
8. Food: fruit juice milk flow measurement of liquid flow measurement
9. Schools, scientific research institutes: measuring water or high temperature heat conduction oil
10. Pot inspection, Metrology Institute: fluid metering
Auto Instrument Making Co., Ltd has been committed to crafting high-end equipment since 1994. Specifically, we focus on manufacturing
measures and process control instruments in the industrial pressure measurement, which pursues to be the cherry on top by adhering
to the accumulated craftsmanship. Our main products include differential pressure transmitters, pressure transmitters, capacitive pressure sensors, electromagnetic flow meters, vortex flow meters, and radar level which are widely used in the industries of electrical power, petroleum, metallurgy, medicine, food, brewing, textile, building material, etc..
As a source manufacturer, we are capable of modifying or remolding the core production equipment to satisfy the specified product features.
The concepts of modification works apply to several annual rings, including welding systems, pressure calibration systems, diaphragm coating systems, and so on.
1. Q: Are you a manufacturer or trading company?
A: We are the manufacturer for pressure, flow and level transmitters since 1994.2. Q: What's your quality control system?
A: As an ISO9001:2008 certificated manufacturer, we have a strict quality control system, and each product is done with fatigue testing, calibration, temperature compensation before shipment. High quality is guaranteed.
3. Q: Is there MOQ with your product?
A: We have no MOQ limits, 1pc for testing is acceptable.
4. Q: Do you provide customized products?
A: Yes, we can print your logo on our products; OEM, ODM & customization are welcome.
5. Q: What is the warranty of your products? And after-sales service?
A: Our warranty time is 12 months after shipment, and our after-sales will respond with your questions in 24hrs, remote instruction by PC network is always available.
6. Q: What is the lead time of your product?
A: We are a factory, our lead time is always within 10~15 working days for products without customization, but lead-time will vary based on different products. You can check detailed lead-time with our sales.
7. Q: What international certificates do you have for your products?
A: We have CE, RoHS, SIL,IOS, ATEX.
