Hard Cover Perfect Hot Thermal Melt Glue Book Binder A3 A4 Paper

 Glue Binder Machine with side gluing60M-A3

Modern appearance design, main glue + side glue, firm and reliable, simple and easily operate.
Using foreign cash chip technology to ensure stability and durability, faster command transmission speed.
Side rubber groove and rubber wheel design.
with book storage platform.
Alloy milling cutter design.
Cover splint, height adjustment device, can adapt to covers of different thicknesses, and arbitrarily control the shape of the spine.

Operation Step:
1. Turn on the power, the machine will automatically preheat, about 25 minutes, and the rubber wheel will start to run after reaching the specified temperature.
2. After the rubber roller rotates, turn on the inner page feed switch according to the thickness of the binding, put in the inner page and tighten it.
3. Place the cover on the left side under the positioning piece and align it with the center line, then fix the clip panel
4. Press the start button, the trolley starts to drive to the right, and complete the steps of milling the back of the inner page of the book by the blade and gluing the rubber wheel.
5. The trolley goes to the far right, the clamping table rises, the cutter plate is tightened, and the cover and the inner page are glued together. After the set time is reached, the cutter plate is released, the clamping table falls back to its original position, and the table is automatically set. Open.