Audited Supplier
1.The belt carcass of this product is EP fab ric of high modulus , low shrink ,and high breaking tensile strength
2.Cover rubber of this product uses EPDM rubber or chlorobutadiene rubber that has very good high temperature resistance . The belt is made of high temperature resistant meterials , through assenbling and vulcani-zing with care.
3.the carcass of this product has very high adhesion after the special tretment of coating and shaing ,under normal working condition with the temperature below 180 ,the belt is low elongation and excellent antiabrsion. It can also bear 250 high temperature for a short time , The belt is suitable for use in cement , metall-urgical and steel industry
1.Specification and technical data :
Fabric type | Fabric structure | Fabric specs | Ply thickness | Strength(N/mm) | Cover thickness | width | length | |||||
warp | weft | mm/ply | 2ply | 3ply | 4ply | 5ply | upper | lower | mm | m | ||
polyester | polester | polyamine | EP80 | 160 | 240 | 320 | 400 | 1.5-12 | 0-4.5 | 400-2500 | 50-500 | |
EP100 | 1 | 200 | 300 | 400 | 500 | |||||||
EP150 | 1.1 | 300 | 450 | 600 | 750 | |||||||
EP200 | 1.2 | 400 | 600 | 800 | 1000 | 500-2500 | ||||||
EP250 | 1.35 | 500 | 7500 | 1000 | 1250 | |||||||
EP300 | 1.45 | 600 | 900 | 1200 | 1500 | |||||||
EP350 | 1.6 | 1050 | 1400 | 1750 | 800-2500 | |||||||
EP400 | 1.75 | 1600 | 2000 | 1000-2500 | ||||||||
EP500 | 1.9 | 2000 | 2500 | |||||||||
EP630 | 2.1 | 2400 | 3000 | |||||||||
Pictures of conveyor belt
Belt carcass | Adhesive strength | elongation | ||
Between plies(N/mm) | Between rubber and carcass | Longitudinal elongation at break%≥ | Longitudinal elongation at reference load%≤ | |
EP canvas | ≥5 | ≥5 | 10 | 2.0 |
Serise | ||||||||||||
|
workshop
Inspetion Equipment
