Audited Supplier
AGR AGRP H05S-K H05SJ-K
Insulated
Stranded
Overhead, Heating, Underground
Copper
PVC
Silicone Rubber
Round Wire
LSOH
ISO9001, CE, CCC, RoHS, VDE
Hoochan
300-30000V
HOOCHANG
Roll, Spool, Drum
0.5MM2--240MM2
China
8544492100
Product Description
CONDUCTOR:bare , tinned copper,
Insulator:Silicone rubber
Glass Fiber Braiding
Silicone Resin coating
RATED TEMP.:-60ºC~180ºC
RATED VOLTAGE:300/500V
Test Voltage: 2000V. 15Min
Mechanical properties
Tensile strength: ≥5N/mm²
Elongation at break of insulation: ≥150%
Min.Bending radius: 6×OD
Characteristics:
The braided synthetic yarn covering, which is applied directly over the insulation, gives the cable, because of its short braiding pitch and high compactness, an excellent mechnical protection by maintaining good flexibility.
The varnishing of the braiding results in good antifriction properties, high abrasion resistance and excellent chemical resistance against transformer oil, light fuel oil and most types of cleaning agents.
In the event of fire, no corrosive and toxic gases will be given off.
Hence, damage caused by fire can be kept to minimum.
Insulator:Silicone rubber
Glass Fiber Braiding
Silicone Resin coating
RATED TEMP.:-60ºC~180ºC
RATED VOLTAGE:300/500V
Test Voltage: 2000V. 15Min
Mechanical properties
Tensile strength: ≥5N/mm²
Elongation at break of insulation: ≥150%
Min.Bending radius: 6×OD
Characteristics:
The braided synthetic yarn covering, which is applied directly over the insulation, gives the cable, because of its short braiding pitch and high compactness, an excellent mechnical protection by maintaining good flexibility.
The varnishing of the braiding results in good antifriction properties, high abrasion resistance and excellent chemical resistance against transformer oil, light fuel oil and most types of cleaning agents.
In the event of fire, no corrosive and toxic gases will be given off.
Hence, damage caused by fire can be kept to minimum.
| Size | Conductor | Insulate Thickness | Braiding thickness | Wire OD | Resist. | ||||
| Structure | OD | Nominal | OD | Nominal | Toler. | Ω/KM | |||
| mm² | No./mm | mm | mm | mm | mm | mm | mm | Max. | |
| 0.25 | 14/0.15 | 0.65 | 0.6 | 1.85 | 0.20 | 2.25 | ±0.15 | 80.9 | |
| 8/0.20 | |||||||||
| 0.35 | 20/0.15 | 0.75 | 0.6 | 1.95 | 0.20 | 2.35 | ±0.15 | 55.0 | |
| 11/0.20 | |||||||||
| 0.5 | 28/0.15 | 0.95 | 0.6 | 2.15 | 0.20 | 2.55 | ±0.15 | 40.1 | |
| 16/0.20 | |||||||||
| 0.75 | 24/0.20 | 1.15 | 0.6 | 2.35 | 0.20 | 2.75 | ±0.15 | 26.7 | |
| 1.0 | 32/0.20 | 1.34 | 0.6 | 2.55 | 0.20 | 2.95 | +0.20 | 20.0 | |
| -0.15 | |||||||||
| 1.5 | 30/0.25 | 1.6 | 0.7 | 3.00 | 0.20 | 3.40 | +0.20 | 13.7 | |
| -0.15 | |||||||||
| 2.5 | 49/0.25 | 2.0 | 0.8 | 3.60 | 0.25 | 4.10 | +0.30 | 8.21 | |
| -0.15 | |||||||||
| 4.0 | 56/0.30 | 2.7 | 0.8 | 4.30 | 0.25 | 4.80 | +0.30 | 5.09 | |
| -0.15 | |||||||||
| 6.0 | 84/0.30 | 3.3 | 0.8 | 4.90 | 0.25 | 5.40 | +0.30 | 3.39 | |
| -0.15 | |||||||||
| 10 | 84/0.40 | 4.6 | 1.0 | 6.60 | 0.25 | 7.10 | +0.30 | 1.95 | |
| -0.15 | |||||||||
| 16 | 126/0.40 | 5.8 | 1.0 | 7.80 | 0.25 | 8.30 | +0.30 | 1.24 | |
| -0.15 | |||||||||
| 25 | 196/0.40 | 7.3 | 1.2 | 9.70 | 0.25 | 10.2 | +0.40 | 0.795 | |
| -0.20 | |||||||||
| 35 | 276/0.40 | 8.6 | 1.2 | 11.0 | 0.30 | 11.6 | +0.40 | 0.565 | |
| -0.20 | |||||||||
| 50 | 396/0.40 | 10.7 | 1.4 | 13.5 | 0.30 | 14.1 | +0.40 | 0.393 | |
| -0.20 | |||||||||
| 70 | 360/0.50 | 12.4 | 1.4 | 15.2 | 0.35 | 15.9 | +0.40 | 0.277 | |
| -0.20 | |||||||||
| 95 | 475/0.50 | 14.5 | 1.6 | 17.7 | 0.35 | 18.4 | +0.50 | 0.210 | |
| -0.25 | |||||||||
| 120 | 608/0.50 | 16.0 | 1.8 | 19.6 | 0.35 | 20.3 | +0.50 | 0.164 | |
| -0.25 | |||||||||
| 150 | 756/0.50 | 18.0 | 2.0 | 22.0 | 0.35 | 22.7 | +0.50 | 0.132 | |
| -0.25 | |||||||||
| 185 | 925/0.50 | 20.0 | 2.2 | 24.4 | 0.40 | 25.2 | +0.60 | 0.108 | |
| -0.30 | |||||||||
| 240 | 1221/0.50 | 23.0 | 2.4 | 27.8 | 0.40 | 28.6 | +0.60 | 0.0817 | |
| -0.30 | |||||||||
| 300 | 1517/0.50 | 26.0 | 2.8 | 31.6 | 0.40 | 32.4 | +0.60 | 0.0654 | |
| -0.30 | |||||||||
