Audited Supplier
Autocrane100ton
6 Months
Two Years
ISO9001
Used
78m-102.5m
80t-100t
3
Two-Arm
Straight Arm
STC1000C7-8
Marine Transport
100ton STC1000C7-8
China
12345
Product Description
90% new Used auto crane/ autocrane100ton STC1000C7-8 sell
Cost EfficiencyLarge lifting capacity crane mounted on robust chassis. Some models feature all wheel steering.
Smart Hydraulics
A more significant flow ensures higher efficiency, such as the higher speed of wire rope reeling. A shunted mode of independently controlled combined motions, like simultaneous vibration-free luffing and hoisting, realizes higher stability.
Double Pump Intelligent Flow Distribution System
The electro-hydraulic control system realizes effective flow distribution, featuring quick response to combined motions and small impact shock, energy saving, and environmentally friendly. Precise control: Excellent inching performance, min. The stable speed of a single rope is 1.2m/min and min. The sound speed of slewing is 0.1°/s, realizing precise lifting of mm level. Integrated slewing buffer control: boost buffer, sequential brake, and free swing technology-smooth start and stop.
High-performance Chassis· Innovative structural frame verified by 200,000 cycling fatigue tests to ensure high reliability.
Smart Control System
CAN BUS system: Controllers, displays, meters, I/O modules, sensors, etc., are integrated into CAN Bus networking and fast-responsive.
Fault diagnosis system: Operating device with intelligent controller, body with BCM module, accurately locating the fault point, making the maintenance convenient.
load moment indicator system protects against overloading, release, and over-winding.
The truck crane is a kind of crane mounted on the chassis of an ordinary car or a special car chassis, and the driving cab is arranged separately from the lifting control room. The advantages of this crane are good mobility and rapid transfer. The disadvantage is that the legs must be supported when working, and the load cannot be driven, and it is not suitable for working on soft or muddy fields. The chassis performance of the truck crane is equivalent to the same total weight of the truck, which meets the technical requirements of road vehicles, so it can pass unimpeded on all kinds of roads. This kind of crane is generally equipped with two control rooms on and off, and the operation must extend the legs to maintain stability. The range of lifting weight is large, from 8 tons to 1600 tons, and the number of axles of the chassis can be from 2 to 10. It is the largest and most widely used crane type.
| 100ton STC1000C7-8 parameter | |
| Maximum lift | 102.5m |
| Maximum lifting force | 4057kN.m |
| Maximum lifting load | 100t |
| Main winch maximum | 135m/min |
| Full arm extension | 135s |
| Full arm lift | 620/640s |
| Maximum rotation | 0-1.5r/min |
| Total machine weight | 54600kg |
| Complete length | 16140mm |
| Full width of the whole machine | 3000mm |
| Total height of complete machine | 3995mm |
| Crane leg span | 8.1(5.35)*7.3m |
| maximum travel speed | 80km/h |
| minimum turning radius | 12m |
| maximum gradeability | 43% |
| approach angle | 20° |
| departure angle | 17° |
The main export countries of the company's products: countries along the Belt and Road, Central Asia, Southeast Asia, Russia, Africa, the Middle East, South America, Myanmar and other countries and regions, providing inspection, customs clearance, transportation and other integrated export services.
