Audited Supplier
GSSLS001
Carbon Steel
as The Customer Required
Common Bolt
Thread Head
DIN, ANSI, GB, JIS, BSW, GOST, as The Customer Required
8.8
Machinery, Chemical Industry, Environmental, Building, as The Customer Required
Color-Zinc Plated
6
1
36mm
3.8mm
Single Thread
Natural, Black Coating, Zinc
S25c, 35, 45
Single
6g
8.8
Cold Heading
Sample Free, Freight Is on Your Own Account
as the customer required
Carton
M8
China
7415339000
Product Description
Application:
The wire rope riveting head is a special joint used to connect the wire rope it connects the two ends of the wire rope firmly together by riveting technology. This kind of joint usually has high strength and reliable connection performance can withstand large tension and shear force.In the process of production and use of steel wire rope, riveting head plays a vital role, to ensure the stability and safety of steel wire rope connection. for example, in the steel wire rope production riveted connectors, adopts the riveting technology to realize the efficient connection of the steel wire rope, reduces production waste, and meets the requirements of pre-tensile tension
We produce all types of standard or non-standard thread screws according to customer's request.Detailed as following table:
| Specification Table of Thread Screw | |||||
| Standard | Size | Pitch of thread (mm) | d(mm) | Wire Diameter ±0.02mm | |
| Max | Min | ||||
| Chinese National Standard Coarse Thread 60° | M5 | 0.80 | 4.98 | 4.83 | 4.30 |
| M6 | 1.00 | 5.97 | 5.82 | 5.18 | |
| M7 | 1.00 | 6.97 | 6.82 | 6.18 | |
| M8 | 1.25 | 7.96 | 7.79 | 7.02 | |
| M9 | 1.25 | 8.96 | 8.79 | 8.01 | |
| M10 | 1.50 | 9.96 | 9.77 | 8.84 | |
| M11 | 1.50 | 10.97 | 10.73 | 9.84 | |
| M12 | 1.75 | 11.95 | 11.76 | 10.7 | |
| M14 | 2.00 | 13.95 | 13.74 | 12.5 | |
| M16 | 2.00 | 15.95 | 15.74 | 14.5 | |
| M18 | 2.50 | 17.95 | 17.71 | 16.20 | |
| M20 | 2.50 | 19.95 | 19.71 | 18.2 | |
| Chinese National Standard Fine Thread 60° | M5 | 0.50 | 4.97 | 4.86 | 4.57 |
| M6 | 0.75 | 5.97 | 5.85 | 5.41 | |
| M7 | 0.75 | 6.97 | 6.85 | 6.41 | |
| M8 | 1.00 | 7.97 | 7.83 | 7.24 | |
| M9 | 1.00 | 8.97 | 8.83 | 8.24 | |
| M10 | 1.00 | 9.97 | 9.82 | 9.23 | |
| M10 | 1.25 | 9.96 | 9.81 | 9.07 | |
| M12 | 1.25 | 11.97 | 11.76 | 11.07 | |
| M12 | 1.50 | 11.96 | 11.79 | 10.89 | |
| M14 | 1.50 | 13.96 | 13.79 | 12.89 | |
| M16 | 1.50 | 15.96 | 15.79 | 14.89 | |
| M18 | 1.50 | 17.95 | 17.73 | 16.86 | |
| M20 | 1.50 | 19.95 | 19.65 | 18.85 | |
| Specification Table of Thread Screw | |||||
| Standard | Size | Thread per inch | d(mm) | Wire Diameter ±0.02mm | |
| Max | Min | ||||
| British Standard Whitworth Thread (Coarse) 55° | 1/8 | 40 | 3.145 | 3.03 | 2.70 |
| 5/32 | 32 | 3.945 | 3.795 | 3.38 | |
| 3/16 | 24 | 4.732 | 4.592 | 4.00 | |
| 1/4 | 20 | 6.32 | 6.165 | 5.45 | |
| 5/16 | 18 | 7.905 | 7.737 | 6.94 | |
| 3/8 | 16 | 9.49 | 9.312 | 8.4 | |
| 7/16 | 14 | 11.2 | 10.88 | 9.84 | |
| 1/2 | 12 | 12.66 | 12.46 | 11.22 | |
| 9/16 | 12 | 14.25 | 14.04 | 12.81 | |
| 5/8 | 11 | 15.83 | 15.61 | 14.27 | |
| Unified Coarse Pitch Thread ( American Standard) 60° | 4# | 40 | 2.824 | 2.695 | 2.37 |
| 5# | 40 | 3.154 | 3.026 | 2.69 | |
| 6# | 32 | 3.484 | 3.333 | 2.91 | |
| 8# | 32 | 4.142 | 3.991 | 3.57 | |
| 10# | 24 | 4.80 | 4.618 | 4.05 | |
| 12# | 24 | 5.461 | 5.279 | 4.7 | |
| 1/4 | 20 | 6.322 | 6.117 | 5.45 | |
| 5/16 | 18 | 7.907 | 7.687 | 6.93 | |
| 3/8 | 16 | 9.491 | 9.254 | 8.40 | |
| 7/16 | 14 | 11.08 | 10.82 | 9.83 | |
| 1/2 | 13 | 12.66 | 12.39 | 11.32 | |
| 9/16 | 12 | 14.25 | 13.96 | 12.8 | |
| 5/8 | 11 | 15.83 | 15.53 | 14.26 | |
| Unified Fine Pitch Thread ( American Standard) 60° | 4# | 48 | 2.877 | 2.713 | 2.44 |
| 5# | 44 | 3.157 | 3.036 | 2.73 | |
| 6# | 40 | 3.484 | 3.356 | 3.02 | |
| 8# | 36 | 4.145 | 4.006 | 3.63 | |
| 10# | 32 | 4.803 | 4.651 | 4.23 | |
| 12# | 28 | 5.461 | 5.296 | 4.81 | |
| 1/4 | 28 | 6.324 | 6.16 | 5.68 | |
| 5/16 | 24 | 7.909 | 7.727 | 7.16 | |
| 3/8 | 24 | 9.497 | 9.315 | 8.74 | |
| 7/16 | 20 | 11.08 | 10.87 | 10.18 | |
| 1/2 | 20 | 12.67 | 12.46 | 11.76 | |
| 9/16 | 18 | 14.25 | 14.03 | 13.25 | |
| 5/8 | 18 | 15.83 | 15.62 | 14.83 | |
| Advanced Planning | Process Control | Quality Issue Feedback |
| ·Multi-functional project team ·Build up standard tree,do the analysis and training ·DFMEA ·4 stage project review, quality gate ·PFMEA ·Visualized WI | ·First and final piece100% inspection. ·Combine self-inspect and patrol inspect. ·Regular inspection on fixture and gauges. ·Upper andlower process error prevention control ·5M1E management | ·Quick feedback, arrive sitewithin 10 minutes ·Define interim and containment action within 4hours ·Daily quick response meeting ·8D ·6 Sigma ·Actions follow-upvalidation ·Share to similarproducts ·Record into failure mode database |
Q1: Are you a manufacturer?
Yes, we have been in manufacturing and providing excellent linear motion partsfor customers more than 20years.
Q2: How long could you prepare samples?
Ans:Normally 1days if we have the sample onhand.lf customized one. about a week around.
Q3: How about batch order production?
Ans: Normally 30days or so for one container
Q4: Do you inspect the finished products?
Ans:Yes, we will do inspection according to lsO standard and ruled by our QCstaff.
Q5: How do you ship the goods?
Ans: By sea, by air by truck or by courier(UPSDHLFedexTNT etc.)
Q6: What advantage do you have?
Ans:1.We have professional engineers,customers can expect the best possibleadvice and support.
2.Related responsible team to answer all your questions and follow-upprocess for you and do update in time.
3.Strict and standard process control according to Quality ManagementSystem.4.Documents support on products, we have strong technical data sheet tosupport our products, which could make you easier to know our products.
