Audited Supplier
Company Profiles
-We are a leading gear motor manufacturer
Zhejiang Donghai Reducer is a leading manufacturer of gear motor and gearbox.
Since 1991, we have specialized in manufacturing a wide range of gear motor and gear box including:
- helical gear motor
- helical bevel gear motor
- parallel shaft helical gear motor
- helical worm gear motor
- hoist drive
- heavy-duty helical gearbox
- heavy-duty helical bevel gearbox
- gear motor for car parking system
- sprial bevel gearbox
Product Description
D series gear motor is composed with two-stage or three-stage gears. Input shaft and output shaft is inline.
Mounting position: footed mounting, flange mounting, both flange and footed mounting etc.
Thechnical data:
Output speed 10 ~ 800 rpm
Rated output torque 10 ~ 20000 Nm
Motor power 0.12 ~ 200 KW
Product Show
Product Specification
| Product features | |||||||
| 1. D series helical gear motor own rational design, compact construction, smaller size than cycloidal gearmotor at the same permitted torque. | |||||||
| 2. Little vibration and low noise, with high transmission efficiency. | |||||||
| 3. The products have been mainly used in chemical machinery, cement agitator machinery, printing and packaging machinery, mine and power transmission machinery, metallurgy etc. | |||||||
| General Technical data | |||||||
| Housing material | HT250 high-strength cast iron | ||||||
| Housing hardness | HBS190-240 | ||||||
| Pinion material | 20CrMnTiH | ||||||
| Gear material | 20CrMnTiH | ||||||
| Surface hardness of gears | HRC58°~62 ° | ||||||
| Gear core hardness | HRC33~40 | ||||||
| Input/output shaft material | 40CrMnTiH | ||||||
| Input / Output shaft hardness | HRC25~30 | ||||||
| Machining precision of gears | accurate grinding, 6~7 Grade | ||||||
| Lubricating oil | L-CKC220 (GB 5903-95) | ||||||
| Heat treatment | tempering, cementiting, quenching, etc. | ||||||
| Efficiency | 94%~96% (depends on the transmission stage) | ||||||
| Noise (MAX) | 60~68dB | ||||||
| Temp. rise (MAX) | 40°C | ||||||
| Temp. rise (Oil)(MAX) | 50°C | ||||||
| Vibration | ≤20µm | ||||||
| Backlash | ≤20Arcmin | ||||||
| Brand of bearings | China Top brand C&U,LYC,TMB or other brands requested, | ||||||
| Brand of oil seal | CTY--- Taiwan or other brands requested | ||||||
| D ---- series helical gear motor | |||||||
| D-series single stages | |||||||
| Model | Output Shaft Dia. | Center Height | Output Flange Dia. | Power | Ratio | Permitted Torque | Weight |
| Solid (mm) | (mm) | (mm) | (kw) | (Nm) | (KGS) | ||
| D37 | 25k6 | 90h13 | 110/160 | 0.12~3 | 4~135 | 210 | 11 |
| D47 | 30k6 | 115h13 | 110/160 | 0.12~5.5 | 4~172 | 335 | 16 |
| D57 | 35k6 | 115h13 | 130/200 | 0.12~7.5 | 5~188 | 490 | 19 |
| D67 | 35k6 | 130h13 | 180/250 | 0.12~7.5 | 5~193 | 570 | 28 |
| D77 | 40k6 | 140h13 | 230/300 | 0.18~11 | 5~197 | 890 | 39 |
| D87 | 50k6 | 180h13 | 250/350 | 0.55~22 | 5~246 | 1660 | 65 |
| D97 | 60m6 | 225h13 | 350/450 | 0.55~30 | 5~290 | 3000 | 110 |
| D107 | 70m6 | 250h13 | 350/450 | 1.5~45 | 2~249 | 4550 | 200 |
| D137 | 90m6 | 315h13 | 450/550 | 3~55 | 5~220 | 9270 | 280 |
| D147 | 110m6 | 355h13 | 450/550 | 4~90 | 5~167 | 14940 | 430 |
| D167 | 120m6 | 425h13 | 550/660 | 7.5~160 | 10~230 | 20880 | 650 |
| D series double stages | |||||||
| Model | Output Shaft Dia. | Center Height | Output Flange Dia. | Power | Ratio | Permitted Torque | Output Speed |
| Solid (mm) | (mm) | (mm) | (kw) | (Nm) | (RPM) | ||
| D27D17 | 25k6 | 90h13 | 95/140 | 0.12~0.18 | 90~229 | 140 | 6~15 |
| D37D17 | 25k6 | 90h13 | 110/160 | 0.12~0.25 | 90~156 | 225 | 4.1~14 |
| D47D37 | 30k6 | 115h13 | 110/160 | 0.12~0.25 | 154~572 | 340 | 2.4~8.5 |
| D57D37 | 35k6 | 115h13 | 130/200 | 0.12~0.25 | 142~782 | 477 | 1.8~9.2 |
| D67D37 | 35k6 | 130h13 | 180/250 | 0.12~0.37 | 158~956 | 590 | 1.4~8.2 |
| D77D37 | 40k6 | 140h13 | 230/300 | 0.12~0.55 | 186~1430 | 880 | 0.97~7.3 |
| D87D57 | 50k6 | 180h13 | 250/350 | 0.12~1.1 | 195~2873 | 1665 | 0.48~7.2 |
| D97D57 | 60m6 | 225h13 | 350/450 | 0.12~2.2 | 209~4678 | 2930 | 0.29~6.8 |
| D107D77 | 70m6 | 250h13 | 350/450 | 0.12~2.2 | 214~7583 | 4510 | 0.18-6.6 |
| D137D77 | 90m6 | 315h13 | 450/550 | 0.12~4 | 35.1~12921 | 9090 | 0.11~6.3 |
| D147D77 | 110m6 | 355h13 | 450/550 | 0.12~4 | 415~21342 | 14940 | 0.06~3.4 |
| D147D87 | 110m6 | 355h13 | 450/550 | 1.5~11 | 159~533 | 14940 | 2.6~9.1 |
| D167D97 | 120m6 | 425h13 | 550/660 | 1.5~11 | 279~2333 | 20250 | 0.6~5.2 |
| D167D107 | 120m6 | 425h13 | 550/660 | 11 | 4.9~8.5 | 17640 | 4.9~8.5 |
| Remark: the weight without oil and motor, shaft and flange input add 10%. | |||||||
Zhejiang Donghai Reducer Co., LTD is professionally manufacturing gear motor and gear box, with more than 20+years experience,
And an industrial and trading company have been set up in Shanghai, known as "Shanghai Teguosi Transmission Equipment Co., Ltd", and shorten as " DHC•TGS", mainly researching and developing high-quality transmission equipment, providing complete sets of equipment for the global intelligent industry in accordance with European standards, National standards and Enterprise standards.
Our products had been Certified by CE,CCC,CQC,XT.
As a leading brand of domestic transmission equipment, it is also a National High-tech Enterprise, a director of the China Heavy Machinery Industry Association, and a Parking Equipment Working Committee and a Bridge Crane Professional Committee.
Your reliable supplier ,we assure you the utmost reliability and security for both product and services.
Our Advantages: Your professional supplier with 20+years experience
Widely Used In Different Industries(Application)
Package
Plastic bag + wooden carton
FAQ
1.Q:What kinds of gearbox can you produce for us?
A:Main products of our company: E, D, T, and P series helical gear motor and
hoist drive
heavy-duty helical gearbox
heavy-duty helical bevel gearbox
gear motor for car parking system
sprial bevel gearbox
more than one hundred models and thousands of specifications
2.Q: How long is your delivery time?
A:Generally it is 5-10 days if the parts are in stock. or it is 15-40 days if the parts are not in stock.
3.Q: What is your MOQ?
A:1 Set
4.Q: :Can you make as per custom drawing?
A:Yes, we offer customized service for customers.
If you have any demand for our products please feel free to contact me.
