
HFC-227ea FM200 /FK-5112 Novec 1230 Total Flooding Fire System, HFC-227ea FM200 /FK-5112 Novec 1230 clean gas automatic fire suppression systems, HFC-227ea FM200 /FK-5112 Novec 1230fire extinguishing system Pipe Network Type FM200 Fire Extinguisher
When the control mode selection key on the automatic fire alarm and fire extinguishing controller is set to the "auto" position, the fire extinguishing system is under automatic control. When a fire occurs in the protection area, the temperature and smoke detectors will send out a fire signal through the automatic fire alarm and extinguishing control After the logic analysis of the device, it sends out a combined sound and light alarm signal, and sends out a linkage command at the same time to close the linkage device. After a delay, a fire extinguishing command is issued, the starting valve is opened to release the starting gas, and the starting gas is opened through the control gas pipeline valves and container valves release the fire extinguishing agent and implement fire extinguishing.

Product Specifications:
No. | Specification | Technical Parameter | |
1 | Filling pressure | 4.2Mpa | 5.6Mpa |
2 | Scale of Protective region for one zone | Area:max single-zone is 800m² volume:max single-zone is 3600m³ | |
3 | Spraying time | ≤10s | |
4 | Filling density | ≤950kg/m3 | ≤1080kg/m3 |
5 | Power | DC24V/1.6A | |
6 | Nitrogen Pressure of Driving Device | 6.0±1.0Mpa(20ºC) | |
7 | Condition of reserving room for container | temperature: -10~50ºC, relative humidity: ≤97% | |
8 | Max working pressure | 5.3Mpa | 8.0Mpa |
9 | Min working pressure | 4.2Mpa | 4.6Mpa |
10 | Capacity | 90L, 120L, 150L, 180L |
Product Details:


Components of HFC-227ea FM200 /FK-5112 Novec 1230 Fire Suppression Systems:
2. High pressure hose: Connect cylinder valve and liquid check valve
3. Discharge Nozzle: Fitted at the end of pipe network to discharge fire suppressing agent
4. Control System: Control panel, smoke and heat detector, fire alarm, discharge indicator light, etc

1. Very swift fire suppression. Reach extinguishing level ≤10s.
2. Safe to people. People is safe when exposed at the FM200 gas discharge level.
3. Low extinguishing concentration. Nearly no obscure to vision in person evacuation.
4. Easy to clean. No residue left, and minimize damage to sensitive equipment.
5. Environment friendly. Zero ozone depletion potential and zero global warming potential.
6. Simple installation, with small storage space.
Working Drawing:


After the logic analysis of the automatic fire alarm and extinguishing controller, it will send out a sound and light composite alarm signal, and at the same time send out a linkage command to turn off the linkage equipment.
After a delay time, a fire extinguishing command is issued, the solenoid valve driver is opened, the container valve is opened, the fire extinguishing agent is released, and the fire is extinguished; if the duty officer discovers a fire, he can press the emergency start button outside the protective area door to implement the fire extinguishing operation ; There is also a manual button on the solenoid valve driver, and mechanical emergency manual operation can also be used to extinguish fire in an emergency.
* Communication rooms
* Underground projects
* Offshore oil production platforms
* Libraries
* Archives
* Treasures warehouses
* Chemical combustibles warehouses
* Generator rooms
* Power distribution rooms



About PRI-SAFETY:
PRI-SAFETY specializes in the manufacture and exportation of Automatic Fire Systems, Throw Type Fire Extinguishers, CAFS Compressed Air Foam Fire Systems, Fire Extinguishers, Fire Hose Reels, Fire Hoses, Fire Cabinets, Valves, Pressure Gauges, Couplings, Smoke Alarms, Fire Blanket and other fire equipment, etc. We focus on providing one-stop fire-fighting products and professional service.

We have attained ISO9001:2000, CE, EN3, EN1869 and EN694 certifications. Almost all products that we provide are manufactured and tested according to the international standard. We also supply OEM service, we can design and produce the products as client's special request.
PRI-SAFETY also has very good after-sales service, we have one professional,high efficient and warmly sales team. We promise that all feedbacks from clients would be replied within 8 hours during working days. We always try our best to provide better service to meet our clients' demands.
Our company rule is saving time and cost for clients, taking good profit and well development for clients. We supply well growing space and training for each staff, help staffs to achieve their dreams. Then clients and staffs push our company development.
FAQ:
1. Who are we?
We are based in Zhejiang, China, start from 2009,sell to Western Europe(39.36%),Africa(15.12%),Mid East(15.04%),Central America(12.33%),South America(10.03%),North America(4.01%),Northern Europe(2.56%),Southeast Asia(1.05%),Eastern Asia(0.50%). There are total about 11-50 people in our office.
2. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3. What can you buy from us?
Automatic Fire Suppression System,Tube fire system,CAFS Compressed Air Foam Fire System,Throwing Fire Extinguisher,Fire Extinguisher Accessoriers
4. Why should you buy from us not from other suppliers?
One Stop Fire Fighting Equipment supply and professional service. We have CE, EN3, EN671, EN1869 certificates. Mainly export to Europe, Middle east, South America, Africa,etc.
5. What services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,Express Delivery;
Accepted Payment Currency:USD,CNY;
Accepted Payment Type: T/T,L/C,D/P D/A,Western Union,Cash;
Language Spoken:English,Chinese,Spanish