Audited Supplier
HFNC High Flow Oxygen Therapy Nasal Oxygen Cannula Oxygen Therapy Machine
Advantages:
>Compared with the traditional oxygen therapy, the optimum humidity oxygen supply can be controlled.
>Easy to use and tolerate, and supply flow and oxygen concentration without any influence.
>When the patient was removed or changed, the treatment was variable and continuous.
>The interface is smaller and does not require a variety of devices and treatment interface switching.promote oxygenation, reduce WOB.
>Improve airway mucosal clearance, more comfortable.
>Reduce the dead space of the pharynx and provide low level positive pressure.
>Get the same effect as low level CPAP.
Consist of:
Air-oxygen blender;
Chamber with heated;
Breathing circuit with heated wire;
Nasal prong.
Choose to match: medical air compressor.
Technical parameter:
>Air-oxygen blender (AD3000-SPA)
| »FiO2 | 21%~100% | »alarm noise | >57dB(A) |
»Folw | 0~18LPM | »pressure of air and oxygen | 0.3MPa~0.4MPa |
»gas-source interrupted | audible alarm | »measurement of main machine | 6.8*6.8*7.5cm |
| »pressure difference | Pressure difference more than 0.1MPa, audible alarm | »weight | About 1.6kg |
| »alarm time | > 60s | »certificate | EN ISO 13485 |
>PN-2000FB humidifier
»temperature | Mode with Heated wire: 25ºC~39ºC | »Max-temp of heating appliance | <85ºC |
| Mode without heated wire: 23ºC~37ºC | »thermal cutoff of heating plate | 120±5ºC | |
»maximum water capacity | 230mL | »operating ambient temperature | 18ºC~26ºC |
| »working pressure | ≤2kPa | »display window flashing | patient distal temperature>40ºC |
| »flow | 180L/min | »H | patient distal temperature≥50ºC |
| »drop of pressure | <300Pa | »L | patient distal temperature≤10ºC |
| »power supply | 220VAC 50Hz | »ER2 | heating plate sensor failure or off |
| »power consumption | 150W | »ER3 | heating plate sensor failure or off |
| »volume | 135mm*145mm*155mm | »weight | 3.2kg |
