Audited Supplier
110#
Customized
AISI, API
Stub-length
DTH Hammer
Hard Alloy
Well Drilling
Male or Female
Drilling Equipment
Rock Bit
Forging
Rock Bit
Groutiong Coal Mine Gas Discharge Water Well Drill
Customized
Fast Speed, High Efficiency
Drilling Tools
Supported
New
7 Kg
110mm
Alloy Steel, Diamond, Carbide
Wear Resistant
Wooden Box
75~325#
Changsha, Hunan, China
8430691900
Product Description
Product Introduction
Our drilling bits are widely used in different drilling applications including mining,quarrying, water well drilling, geotechnical industries and etc.
In DTH drilling, the rock drilling bit is a continuation of the shank, which the rock drill piston strikes directly. Since the piston is in direct contact with the drill bit, little energy is lost. This gives DTH drilling a nearly constant penetration rate regardless of hole length.
DTH Drill bits specification:
Competitive Advantage:
1.Deep and Fast Penetration,long life.
2.Reasonable Price
3. Good Quality,More efficient energy transfer, faster drilling speed, lower air consumption and lower oil consumption
4. Best Service
Detailed photos:
Packing&Shipping
Company introduction
Changsha Fast Drill Engineering Machinery Co., Ltd. located in Changsha,hunan,which is an integrated corporation specialized in manufacturing and exporting top quality drilling equipments and drilling parts for over decades such as electroplated diamond drill bits, hot-pressed diamond drill bits, matching reamers, PDC core drill bits, three-wing and four-wing non-core PDC drill bits, core drill bits, non-core drill bits, wireline core drill bits, tricone non-core drill bits, geological drill bits, water well drill bits, drilling rigs, drilling accessories, mud pumps, drilling tools, geological pipes, geological drill rods, and more. We offer a full range of specifications and models, direct from the factory with guaranteed quality and very competitive price.
What's more, we can support all kinds of customized models as we are supported and assisted by a rich experienced team of designers and engineers that enable us to complete all the assigned projects successfully as per the specified requirement from our clients.
FAQ
Q1: Are you original manufacturer or trading company?
A1: We are an integrated corporation specialized in manufacturing and exporting.
Q2: What are your main products, and used for ?
A2: Our products include diamond core bits, PDC drill bits, reaming shells, core barrels, casing, drill rods, SPT equipment, drill rig and other drilling parts. They are mostly used for mineral exploration, geological drilling, geotechnical engineering, building wells drilling and soil sampling
Q3: Can you supply related drilling tools?
A3: Yes, we can supply full set of drilling tools, such as drill pipe, tricone bit, PDC bit, drag bit, DTH hammer and bit. Moreover, we have drilling equipment like mud pump, air compressor, etc. as well.
Q4: How about payment,MOQ and delivery methods?
A:1. Payment: T/T, L/C, Western Union, Paypal,
2. Min. order quantity: 1 piece.
3. Transportation: By DHL/TNT/FedEx express, air transportation, sea and train.
Q5:How can you ensure the quality?
A5: We have our professional QC and all the products will be strict inspection and testing for every order before shipment.
Contact Us
Sunny Zhang
Sales Representative
Mobile:+8618974891390
Email address:
Website:
Our drilling bits are widely used in different drilling applications including mining,quarrying, water well drilling, geotechnical industries and etc.
In DTH drilling, the rock drilling bit is a continuation of the shank, which the rock drill piston strikes directly. Since the piston is in direct contact with the drill bit, little energy is lost. This gives DTH drilling a nearly constant penetration rate regardless of hole length.
DTH Drill bits specification:
| Hammer inch | Bits diameter | Shank | |
| Metric | Inch | ||
| 1" | 64mm-70mm | 2 1/2"-2 3/4" | BR1 |
| 2" | 70mm-95mm | 2 3/4"-3 3/4" | MACH20/BR2 |
| 3" | 90mm-102mm | 3 1/2"-4" | COP32/COP34/MACH303 M30/DHD3.5/BR3 |
| 4" | 105mm-152mm | 4 1/8"-6" | COP44/DHD340/MACH44 SD4/M40/QL40 |
| 5" | 133mm-165mm | 5 1/4"-6 1/2" | COP54/DHD350R/MACH50 SD5/M50/QL50/BR5 |
| 6" | 152mm-254mm | 4 1/8"-10" | COP64/DHD360/SD6 M60/QL60/Bulroc BR6 |
| 8" | 203mm-330mm | 8"-13" | COP84/DHD380/SD8 QL80/M80 |
| 10" | 254mm-380mm | 10"-15" | SD10 NUMA100 |
| 12" | 305mm-508mm | 12"-20" | DHD1120/SD12 NUMA120/NUMA125 |
Competitive Advantage:
1.Deep and Fast Penetration,long life.
2.Reasonable Price
3. Good Quality,More efficient energy transfer, faster drilling speed, lower air consumption and lower oil consumption
4. Best Service
Detailed photos:
DTH Drill Bits can be divided into the following three types according to their appearance:
1. Flat type: suitable for drilling hard rock layers and highly corrosive rock layers under high wind pressure.
2. Convex type: suitable for drilling soft to medium hard rocks with medium to low wind pressure, with fast drilling speed.
3. Concave type: suitable for all rock layers, especially in medium hard rocks, with good drilling straightness and slag removal effect.
3. Concave type: suitable for all rock layers, especially in medium hard rocks, with good drilling straightness and slag removal effect.
Packing&Shipping
Company introduction
Changsha Fast Drill Engineering Machinery Co., Ltd. located in Changsha,hunan,which is an integrated corporation specialized in manufacturing and exporting top quality drilling equipments and drilling parts for over decades such as electroplated diamond drill bits, hot-pressed diamond drill bits, matching reamers, PDC core drill bits, three-wing and four-wing non-core PDC drill bits, core drill bits, non-core drill bits, wireline core drill bits, tricone non-core drill bits, geological drill bits, water well drill bits, drilling rigs, drilling accessories, mud pumps, drilling tools, geological pipes, geological drill rods, and more. We offer a full range of specifications and models, direct from the factory with guaranteed quality and very competitive price.
What's more, we can support all kinds of customized models as we are supported and assisted by a rich experienced team of designers and engineers that enable us to complete all the assigned projects successfully as per the specified requirement from our clients.
FAQ
Q1: Are you original manufacturer or trading company?
A1: We are an integrated corporation specialized in manufacturing and exporting.
Q2: What are your main products, and used for ?
A2: Our products include diamond core bits, PDC drill bits, reaming shells, core barrels, casing, drill rods, SPT equipment, drill rig and other drilling parts. They are mostly used for mineral exploration, geological drilling, geotechnical engineering, building wells drilling and soil sampling
Q3: Can you supply related drilling tools?
A3: Yes, we can supply full set of drilling tools, such as drill pipe, tricone bit, PDC bit, drag bit, DTH hammer and bit. Moreover, we have drilling equipment like mud pump, air compressor, etc. as well.
Q4: How about payment,MOQ and delivery methods?
A:1. Payment: T/T, L/C, Western Union, Paypal,
2. Min. order quantity: 1 piece.
3. Transportation: By DHL/TNT/FedEx express, air transportation, sea and train.
Q5:How can you ensure the quality?
A5: We have our professional QC and all the products will be strict inspection and testing for every order before shipment.
Contact Us
Sunny Zhang
Sales Representative
Mobile:+8618974891390
Email address:
Website:
