Audited Supplier
High Brightness 1.3 Inch Industrial LCD Panel Resolution 240X240 Interface Spi Color LCD Panel
The HC-130BC2401 is a 1.3 inch tft LCD display module with optional resistive touch screen and capacitive touch screen control with a resolution of 240×240 pixels. This small size TFT LCD is in portrait mode, the TFT panel adopts IPS panel, left: 80/right: 80/up: 80/down: 80 degrees.Optional RTP or CTP.
This HC-130BC2401 inch module has built-in ST7789V3 controller IC, supports SPI interface, the power supply voltage (VCC) range is 3.0V to 3.6V, the brightness is 400 nits (typ), and the contrast ratio is 800:1. This module is ideal for industries such as instrumentation, household appliances, etc. The module can operate from -20°C to +70°C; its storage temperature range is -30°C to +80°C
DRAWING
General Specifications
| Item | Contents | Unit |
| Size | 1.3 | inch |
| LCM Dimension | 26.20(W)* 29.22(H) *1.52(T) | mm |
| LCD Active Area | 23.40* 23.40 | mm |
| Number Of Dots | 240×240 | pixel |
| LCD Type | a-Si TFT | |
| Viewing Direction | IPS | |
| Driver IC | ST7789V3 | |
| Interface Type | SPI | |
| Operating Temperature | -20ºC~ 70ºC | |
| Storage Temperature | -30ºC~ 80ºC | |
| Backlight Type | 2 LEDs | |
| Brightness | 400 | cd/m2 |
Interface
| NO. | Symbol | Description |
| 1 | LEDA | BACKLIGHT ANODE |
| 2 | LEDK | BACKLIGHT CATHODE |
| 3 | GND | Ground |
| 4 | VCC | POWER SUPPLY |
| 5 | IOVCC | I/O POWER SUPPLY |
| 6 | IM1/2 | I/O choose |
| 7 | RESET | Reset pin |
| 8 | CS | Chip enable, Low-active |
| 9 | RS/SCL | Data/Command register address/Serial Clock |
| 10 | WR/DC | Write signal, rising-edge-trigger/Destination register selection |
| 11 | RD | Read signal, rising-edge-active. |
| 12 | SDA | Serial Data Input |
| 13 | DB0 | Data Bus |
| 14 | DB1 | Data Bus |
| 15 | DB2 | Data Bus |
| 16 | DB3 | Data Bus |
| 17 | DB4 | Data Bus |
| 18 | DB5 | Data Bus |
| 19 | DB6 | Data Bus |
| 20 | DB7 | Data Bus |
| 21 | TE | Frame mark. |
| 22 | NC | NC |
| 23 | GND | Ground |
| 24 | GND | Ground |
ABOUT US
SGS Certification
Experimental equipment
Q: How can I get some samples?
A: We don't provide free one, but we can have a discount when you reorder according to different quantity, and you will win at least 3% discount.
Q: What is the MOQ?
A: It depends on different products. Please keep in touch with sales to confirm the MOQ.
Q: How do you control quality?
A: All materials we purchase for making any orders are high quality and RoHS compliant, and Control quality with ISO 9001:2001 management system.
Advance inspection instrument and equipment to ensure 100% inspection for each and every piece before shipment.
Q: Does your product have any warranty?
A: Yes, we offer 12 months warranty for our products.
Q: What's your payment method?
A: Payment: T/T, Paypal, Western Union, etc.
For samples: payment in advance.
For mass production: 30% deposit and 70% balance before shipment.
Q: Do you offer custom solution?
A: Yes, we can offer custom solution if standard products couldn't meet buyer' requirements.
