Audited Supplier
Add: Guanting Industrial Park, Cangzhou City, Hebei, China
High-quality ceramic fiber sampling spoon is used for getting metal liquid. The ceramic fiber sampling spoon is made of fiber which is high quality and high temperature resistance. The sampling scoop must be put on the top of the furnace for 3 minutes before spooning up the molten liquid. Preheat the scoop for three minutes before getting the metal liquid. Please do not scrape the scoop surface if it is dirty with slag or scrap, immerse the scoop into the molten liquid for cleaning. The product is through vacuum forming process. Working Temperature is from 1000~1700 ºC.
Features:
The hot metal sampling spoon adopts vacuum suction forming technology and mold. Use amorphous ceramic fiber as the main material. The hot metal sampling spoon is specially used to take out the liquid metal from the furnace or the bag for laboratory analysis. It is resistant to extreme cold and extreme heat, does not crack, can be reused, and effectively protects the staff. The product features are as follows:
Multiple Types of Selection:
Suitable for transportation and pouring of various metal liquids
The high-temperature resistance of the product can reach 1700ºC
It has the characteristics of light weight, good heat preservation effect, and low heat capacity
The temperature loss does not exceed 5ºC, and it is easy to maintain and repair
Properties:
| Production Name | Ceramic Fiber Sampling Spoon | |
| Standard | 150ML | |
| Material | Spoon Body Material | Aluminum Silicate Fiber |
| Spoon Handle Material | Q235 Steel | |
| Maximum Working Temperature | 1500ºC | |
| Chemical Composition | Al2O3+SiO2≥98% | |
Model No.: 150ml, 125ml
Certification: ISO9001: 2015
Machining Tolerance: +/- 0.15mm
Coating: Zinc Oxide
Surface Roughness: Ra 12.5
Surface Treatment: Polishing
Casting Form Usage count: Semi-permanent
Casting Metal: Cast iron
Casting Form Material: Ceramics
Hs Code: 69039000
Packing: Carton and pallet
Q: Are you Factory?
A: Definitely, we are a factory. Welcome to visit us!
Q: What Parameters should I provide to you for a proper quotation?
A: Application, pore size, dimension, color, quantity, packing requirements, trade terms.
Q: How can you control your quality?
A: We have a complete QC system for the chemical composition and physical properties of each production processing. After production, all the goods will be tested, and we have the quality certificates with ISO9001.
Q: What is your lead time?
It usually needs about 15- 20 days after receiving the PO.
Q: Do you provide Samples?
A: Yes, our factory provides samples for testing, pls send detailed parameters to us. (if customized, withdrawing is best) The samples will be charged or free according to the specific requirements.
Q: What are the Payment Terms?
A: We accept T/T, L/C, West Union, etc.
Q: How can I get samples?
A: We are honored to offer you the samples.
Q: What about your Packing?
A: We provide carton boxes, pallets, etc. OEM packing is available too.
Q: Do you have R&D services?
A: We have an R&D department to assist you in developing new products.
Q: Does your company accept customization?
A: We accept OEM service.
Q: Can we visit your company?
A: Yes, for sure, you are welcome to visit our company.
