Audited Supplier
Mc nylon means monomer casting nylon, is a kind of engineering plastics used in comprehensive industries, has been applied almost every industrial field.
Nylon Rods specifications
| Diameter (mm) | 40-500mm |
| Length (mm) | 500mm,1000mm, 2000mm |
Name: MC Nylon Polyamide
Colors include: Natural white, black, blue, green, yellow and other colors
Othe Types: rod,tubes,sheets&machine parts
Characteristics
-Excellent wear resistance
-Good sliding properties
-High strength and toughness
-Self-lubricating
-Resistant to oil, weak acid and alkali
-Shock absorption
-Noise absorption
-Good electrical properties
Technical Data Sheet
| PROPERTIES | Unit | Value |
| I.Physical Properties | ||
| Density | g/cm3 | 1.15~1.2 |
| Water absorption 24hrs | % | 2.5 |
| II.Thermal Properties | ||
| Heat deflection temperature - HDT/A | ºC | 95 |
| Min. service temperature | ºC | -30 |
| Max. service temperature | ºC | 105 |
| Thermal conductivity at 23 ºC | W/(K*m) | 0.23 |
| Coefficient of linear thermal expansion | 10-4*K-1 | 0.8 |
| Flammability Rating(6mm thickness) | - | HB |
| III.Mechanical Properties at 23ºC | ||
| Tensile strength at yield | MPa | 80 |
| Tensile strength at break | Mpa | - |
| Elongation at break | % | 3 |
| Modulus of elasticity after tensile test | MPa | 3,300 |
| Modulus of elasticity after flexural test | MPa | - |
| Hardness - Shore D | 84 | |
| Charpy impact strength | kJ/m2 | N. B. |
| Friction coefficient | 0.36 | |
| IV.Electrical Properties at 23ºC | ||
| Dielectric constant at 1 MHz | 106Hz | 3.70 |
| Dielectric loss factor at 1 MHz | 106Hz | 0.03 |
| Volume resistively | Ohm (Ω) * cm | ≥1015 |
| Surface resisively | Ohm (Ω) | ≥1013 |
| Dielectric strength | kV/mm | 50 |
| NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m | ||
Images
FAQ
Q1: How can I get a sample?
A1: Small size of sample are free, you only need pay for the shipping cost, or you can provide your UPS, DHL, Fedex, TNT courier to us. Customized size of sample should be charged.
Q2: What is your payment term?
A2: Small order ,we accept by T/T,western union, paypal, .Bulk quantity order ,50T/T in advance, 50% balance before shipment. Other terms negotiable.
Q3:Can we purchase a small part of plastic sheet / rod?
A3: Yes, if we have the size you require in stock.
Q4:Can you manufacture the plastics products as per drawing?
A4: Yes,we can.
Q5:What kinds of processing machine do you have?
A5: CNC machining center,CNC lathes,Milling,Laser engraving machine.
