Audited Supplier
MVR evaporator utilizes the secondary steam generated in the evaporator, increases the pressure and the temperature after compression via the compressor, then sends it to the heating chamber of the evaporator as heating steam, and keeps the material in boiling state, thus reasonably utilizing the evaporated steam, improving the efficiency, and reducing energy consumption. MVR evaporator is comprised of the heater, separator, gas compressor, pre-heater, condenser, pump, control system, working platform, etc. Generally, the efficiency of MVR evaporator is 20 to 30 times higher than that of multi-effect evaporator. Only electricity is consumed for normal operation with no steam. Energy consumption for evaporation of one ton of water is 15-100KW/h, with low operating cost. This equipment is currently the most energy-saving concentration equipment, mainly implementing single-effect evaporation or multi-effect evaporation. With little heating temperature difference and short retention time, it is applicable to heat sensitive materials; with compact structure, it covers a small area; the equipment achieves automatic operation through DCS control and can operate stably for a long time.
MVR evaporator is widely used for evaporation and concentration in grease chemical engineering, starch, juice, sewage treatment and other industries.
1) The enrichment ratio is larger, use falling film evaporation, and the concentration time is short.
2) Can design according to the requirement of the user switch to change each other, in order to suit the production of different products.
3) Low evaporation temperature, the material is heated smooth, suitable for all kinds of material of evaporation.
4) Special distributor structure to ensure that the material uniform distribution in the membrane tube, improve the efficiency of evaporation.
5)The device can be continuous production.
| 1.Carefully check the quantity and quality of equipment before packing. |
| 2.Good packed by plastic wrap. |
| 3.Iron Frame, Suitable for land transport and sea freight. |
| 4.Fittings and spare parts are packed in wooden pallet. |
| 5.Add labels and shipping mark. |
Our company has successively obtained the national standard pressure vessel manufacturing license, the pressure vessel design certificate, the ISO9001 certificate, the ISO14001 certificate, and obtained the ASME,CE,DNV, TR-620 certificates successively by cooperating with many international professional testing institutions such as BV, TUV, DNV, SGS.
