Audited Supplier
S
Within 1 Year
110m-150m
>400 L/min
Motor/ Diesel
Single-Stage Pump
High Pressure Pump
Double-Suction Pump
Horizontal Pump
Horizontal Split Pumps
Since Irrigation Centrifugal Pumps
Closed
Pump, Pumps, Condensate Pump, Slurry Pump, Circulating Pump, Irrigation Pump
Electric Motor/ Diesel Engine
as Customer Required
220V/380V/410V/460V/High Voltage
50Hz/60Hz
Dewatering and Process Water
Municipal Water Supply
Agricultural Irrigation
Environmental Protection
Mine Water Supply and Drainage
DEPON
Wooden Case
150S-50 ~ 800S-76B
Hebei
8413709990
Product Description
Agricultural Irrigation Big Flow Water Pump
Introduction
The S series pumps are single stage, double suction; horizontal split case pumps designed for high volume water transfer in a wide range of applications. Centurion pumps are available in 43 sizes ranging from 80mm to 400mm discharge and capable of capacities up to 4000 cubic meters per hour and heads up to 160 meters. Centurion pumps offer ease of maintenance with simple assembly/disassembly (no requirement for special tools). All major wear components and replaceable parts are easily accessible and can be changed out with minimal effort and downtime, without removing the suction and discharge piping.
Features
Adopts horizontal, vertical axis medium open type double pump shell structure, lining for cemented carbide or rubber has good wear-resisting, corrosion resistance and high reliability.
High efficiency hard alloy, and low NPSH
To meet the different operation conditions, adopted the brief type structure bearing parts, selected high bearing capacity design, alloy bearing grease lubrication oil.
Through adjusting the clearance between protection board and impeller, ensuring the pump efficient operation
Using packing seal, impeller sealing, and container type mechanical seal to adapt to different operating mode requirement.
Pump and drive can choose straight league transmission, triangle, hydraulic transmission device coupled transmission, reducer drive.
The outflow direction can be installed by eight Angle rotation to adapt to different site installation condition.
Available to use multiple series, to satisfy the long-distance transmission requirements
Technical Data
Application
Fire Protection
Water Transfer
Municipal Water Supply
Irrigation
Industry
Process Water
Raw Water Supply
Dewatering (Clean Water)
Flood Mitigation
Model Meaning
E.g. 250 S - 39 A
250 - Pump's inlet diameter
S - single-stage double-suction centrifugal pump
39 - rated head
A - impeller cut for the first time
Pump Performance
Construction Material
Cast Iron, Ductile Iron, Stainless Steel Available.
Pump Drive
Electric Motor / Diesel Engine
Shirley She
Tips:
Necessary information to be provided to select a pump/ make quotation:
1. Medium to be pumped ( water / partical size / PH / specific gravity / temperature )
2. Horizontal, Vertical or Submersible Pump ?
3. Head / Pressure
4. Flow Capacity
5. Drive type (Motor / Diesel)
6. You local power supply (voltage & frequency)
We specialized in centrifugal pumps including Slurry /Water/Chemical Pumps.
More pump models and spare parts are available.
Introduction
The S series pumps are single stage, double suction; horizontal split case pumps designed for high volume water transfer in a wide range of applications. Centurion pumps are available in 43 sizes ranging from 80mm to 400mm discharge and capable of capacities up to 4000 cubic meters per hour and heads up to 160 meters. Centurion pumps offer ease of maintenance with simple assembly/disassembly (no requirement for special tools). All major wear components and replaceable parts are easily accessible and can be changed out with minimal effort and downtime, without removing the suction and discharge piping.
Features
Adopts horizontal, vertical axis medium open type double pump shell structure, lining for cemented carbide or rubber has good wear-resisting, corrosion resistance and high reliability.
High efficiency hard alloy, and low NPSH
To meet the different operation conditions, adopted the brief type structure bearing parts, selected high bearing capacity design, alloy bearing grease lubrication oil.
Through adjusting the clearance between protection board and impeller, ensuring the pump efficient operation
Using packing seal, impeller sealing, and container type mechanical seal to adapt to different operating mode requirement.
Pump and drive can choose straight league transmission, triangle, hydraulic transmission device coupled transmission, reducer drive.
The outflow direction can be installed by eight Angle rotation to adapt to different site installation condition.
Available to use multiple series, to satisfy the long-distance transmission requirements
Technical Data
| Pump Outlet: | 80-800mm |
| Capacity: | 60-11,600m3/hr |
| Head: | 7-200m |
| Temperature: | Max 105ºC |
| Max Working Pressure: | 25 bar |
| Max solids content: | 80mg/L |
Application
Fire Protection
Water Transfer
Municipal Water Supply
Irrigation
Industry
Process Water
Raw Water Supply
Dewatering (Clean Water)
Flood Mitigation
Model Meaning
E.g. 250 S - 39 A
250 - Pump's inlet diameter
S - single-stage double-suction centrifugal pump
39 - rated head
A - impeller cut for the first time
Pump Performance
| Pump Model | Capacity (m3/h) | Head(m) | Motor Power (kw) | Speed (rpm) | NPSH (m) |
| 150S-50 | 160 | 50 | 37 | 2950 | 3.9 |
| 150S-78 | 160 | 78 | 55 | 2950 | 3.7 |
| 200S-42 | 280 | 42 | 45 | 2950 | 6 |
| 200S-95 | 280 | 95 | 132 | 2950 | 5.3 |
| 250S-14 | 485 | 14 | 30 | 1450 | 3.8 |
| 250S-65 | 485 | 65 | 132 | 1450 | 3.1 |
| 300S-90 | 790 | 90 | 315 | 1450 | 4.2 |
| 350S-125 | 1260 | 125 | 710 | 1450 | 5.4 |
| 400S-90 | 1620 | 90 | 560 | 1450 | 6.2 |
| 500S-59 | 2020 | 59 | 450 | 970 | 4.5 |
| 600S-75 | 3170 | 75 | 900 | 970 | 6 |
| 800S-76 | 5500 | 76 | 1600 | 730 | 6 |
| 800S-76 | 4400 | 49 | 800 | 585 | 4.2 |
Construction Material
Cast Iron, Ductile Iron, Stainless Steel Available.
Pump Drive
Electric Motor / Diesel Engine
Shirley She
Tips:
Necessary information to be provided to select a pump/ make quotation:
1. Medium to be pumped ( water / partical size / PH / specific gravity / temperature )
2. Horizontal, Vertical or Submersible Pump ?
3. Head / Pressure
4. Flow Capacity
5. Drive type (Motor / Diesel)
6. You local power supply (voltage & frequency)
We specialized in centrifugal pumps including Slurry /Water/Chemical Pumps.
More pump models and spare parts are available.
