Audited Supplier
MVT
Support Operation Guidance
380V
CE
1 Year
Dongguan, Guangdong
Temperature Pressure Testing Machine
Temperature Pressure Testing Chamber
100-1000L
MENTEK
Wooden Box
50*50*40cm
China
9030339000
Product Description
High Low Temperature Low Pressure Testing Chamber Environmental Tester
Main Parameters
Note
1. Customizable options for non-standard sizes are available to meet diverse requirements.
2. Flexible agreements can be made regarding the heating and cooling rate and load capacities.
1. Use 12mm manganese steel alloy plate plus support skeleton as external pressure materials, the pressure-bearing capacity can reach10 T/Square;
2. Replaceable stainless steel method with quick sealing technology Lanpan interface with aviation terminal, realize the trial product with real no leakage test;
3. Adopting advanced low-pressure constant temperature technology, make sure to be in low air the constant temperature fluctuates little under any temperature conditions in the pressure state.
| Model | MVT-100 | MVT-500 | MVT-1000 | ||
| Temperature/pressure range | Temperature: 20ºC/40ºC/70ºC~+160ºC Air pressure: ~05kPa | ||||
| Temperature control performance | Temperature fluctuation: <±0.5ºC (ordinaryt pressure) Temperature deviation: <±2.0ºC (ordinaryt pressure) Temperature uniformity: ±2.0ºC (ordinaryt pressure) | ||||
| Performance parameter | Pressure deviation | ≤±2kPa(≥40kPa); ≤±5%(2~40kPa); ≤i01kPa(≤2kPa) | |||
| Heating and cooling rate | The agreed temperature range and rate of temperature rise and fall can be adjusted from -7 to 1 ºC, or according to the agreement (normal pressure) | ||||
| Voltage reduction time | Reduce atmospheric pressure to 0.5kPa ≤ 30min (when dry inside the box) | ||||
| Boost recovery rate | ≤10kPa/min | ||||
Structure | Pressure bearing method | Internal and external pressure can be delivered, using high-quality 12mm thick manganese steel alloy plate as the external pressure box body. The overall pressure strength design capacity is greater than 10t/square, and it is resistant to high and low temperatures and not easily oxidized | |||
| Material of inner and outer boxes | Outer wall material: double-sided galvanized steel plate, surface spray treated, inner wall reinforced to enhance the load-bearing support of the outer box. Inner wall material: stainless steel plate SUS304 | ||||
| Thermal insulation material | The filling material is a vacuum specific composite pressure insulation material with strong pressure bearing capacity and high pressure resistance, which will not break | ||||
| Cooling system | Cooling method | Single stage mechanical refrigeration/cascade two-stage compressor refrigeration method | |||
| Refrigerator | French Taikang/German Bizelle imported compressors | ||||
| Control system | Controller | Original Japanese imported 7-inch TFT touch screen controller | |||
| Communication interface | USB RS232/RS485 etc | ||||
| Heater | Nickel chromium alloy electric wire heater | ||||
| Other configurations | Observation window | 250mm high load vacuum glass | |||
| Vacuum system | German Ley-bold direct air-cooled single-stage oil sealed rotary vane vacuum pump | ||||
| Temperature sensor | Pt100 | ||||
| Pressure sensor | Swiss HUB sensor | ||||
| Inner size | width (cm) | 50 | 80 | 100 | |
| height (cm) | 50 | 80 | 100 | ||
| depth (cm) | 40 | 80 | 100 | ||
| Effective volume | 100L | 512L | 1000L | ||
| Power | AC380V 50Hz Three phase four wire system+grounding wire | ||||
| Standard configuration | 1 product manual, 1 factory inspection report, 1 certificate of conformity and quality assurance certificate, 2 test brackets, and testing interfaces as agreed | ||||
| Meet the testing standards | GB/T2423series GB/T5170series GJBl50Aseries GJB360A/B GB/T10589 GB/T11158 GB/T11159 | ||||
1. Customizable options for non-standard sizes are available to meet diverse requirements.
2. Flexible agreements can be made regarding the heating and cooling rate and load capacities.
