Audited Supplier
HD16S Hydraulic Crawler Bulldozer
Engine: Weichai WD10G178E25
Rated Power: 131KW (178HP) @1850 rpm
Operating Weight: 17 ton
Main Features:
•Weichai WD10G178E25 engine gives you more power and reliability you need. Improved fuel economy over the previous model with strong torque output and low fuel consumption gives you excellent overall fluid efficiency.
•The gearbox uses a planetary gear structure that operates the hydraulic control valve to achieve forward, reverse and various shifts. The structure is planetary gear, multi-plate clutch, hydraulic combined with forced lubrication, which is divided into three forward and three reverse.
•The closed system keeps the tank pressure at a specific value, which can increase the evaporation temperature and heat dissipation efficiency of the cooling water. The fan power comes from the engine, and the forced air supply increases the cooling effect.
•Mainstream 14MPa working hydraulic system,can greatly reduce the failure rate of hydraulic components with overload protection function.
•The use of waterproof connector of the whole vehicle,new relays and injection molding instruments can effectively eliminate the failure of the electrical system. The instrument box integrates air conditioning, electrical appliances and instruments into one, which is more beautiful and luxury.
•The main frame of the full box structure adopts steel plate welded full box type integral structure, which is welded with the rear axle box. It has high impact load bearing capacity and resistance to bending and twisting. High quality weld seam ensures the main frame has a full life cycle.
•The swing type balance beam suspension structure with splayed beam is connected with the frame and traveling system to transmit the working load and impact load to the main frame during working, which effectively improves the stability of small-sized bulldozers under complicated working conditions.
•The standard straight tilt blade features powerful cutting force and the three-shank ripper can be equipped for the ripping of clay and frozen earth, featuring high working efficiency and super-strong penetrating force
•Evangel bulldozers are 95% similar to the products of the famous Chinese manufacturer Shantui
Main Specifications:
| Overall | Dimension | 5262×4150×3074 mm | ||
| Operating Weight | 17000 kg | |||
| ENGINE | Model | Weichai WD10G178E25 | ||
| Type | Water-cooled, in-line, 4-stroke,direct injection | |||
| Number of Cylinders | 6 | |||
| Bore × Stroke | Φ126×130 mm | |||
| Piston Displacement | 9.726 L | |||
| Rated Power | 131 KW (178HP) @1850 rpm | |||
| Max Torque | 765 N·m @1300 rpm | |||
| Fuel Consumption | 214 g/kW·h | |||
| TRANSMISSION SYSTEM | Torque Converter | 3-element, 1 stage, 1 phase | ||
| Gearbox | Planetary gear type, power-shift, forced lubrication | |||
| Central Drive Shaft | Spiral bevel gear, single-stage speed reduction, splash lubrication | |||
| Steering clutch | Wet,multi-disc, spring loaded, hydraulically separated, hydraulic control | |||
| Steering brake | Wet type,floating band structure,foot brake with hydraulic booster | |||
| Final drive | 2-stage speed reduction of spur gear, splash lubrication | |||
| TRAVEL SPEED | Gear | 1st | 2nd | 3rd |
| Forward | 0~3.29 km/h | 0~5.82 km/h | 0~9.63 km/h | |
| Reverse | 0~4.28 km/h | 0~7.59 km/h | 0~12.53 km/h | |
| UNDERCARRIAGE SYSTEM | Type | Sprayed beam, suspended structure of equalizer | ||
| No. of Carrier Rollers | 2 each side | |||
| No. of Track Rollers | 6 each side | |||
| No. of Track Shoes | 37 each side | |||
| Track Shoe type | Single Grouser | |||
| Width of Track shoe | 510 mm | |||
| Pitch | 203.2 mm | |||
| Track Gauge | 1880 mm | |||
| Ground Pressure | 0.067 Mpa | |||
| HYDRAULIC SYSTEM | Max Pressure | 14 Mpa | ||
| Pump Type | Gear Pump | |||
| Displacement | 243 L/Min | |||
| Bore of Working Cylinder | 110 mm × 2 | |||
| BLADE | Blade Type | Straight-tilt Blade | Angle Blade | Semi-U-blade |
| Blade Capacity | 4.5 m³ | 4.3 m³ | 5 m³ | |
| Blade Width | 3388 mm | 3970 mm | 3556 mm | |
| Blade Height | 1150 mm | 1040 mm | 1120 mm | |
| Max Drop Below Ground | 540 mm | 540 mm | 530 mm | |
| THREE SHANK RIPPER | Max digging depth | 572 mm | ||
| Max lift above ground | 592 mm | |||
| Weight of 3-shank ripper | 1667 kg | |||
